Dosing Done Right
Published

Global Report Outlines How to Rid Oceans of Plastic Waste

A path that could reduce ocean plastic waste by nearly half by 2025 and reverse it in another decade outlined by new study.

Share

 

The release of a new global report that both identifies the origins of the global ocean plastic debris and how it leaks into the oceans and also outlines reduction solutions and their relevant economics, as well as how to trigger implementation of these solutions from the near-to-the-long-term, is being announced today by the DC-based Ocean Conservancy’s Trash Free Seas Alliance

 

Annually, 8-million/m.t. of plastics leak into the oceans and the amount continues to grow. Lacking a concerted global action, this could translate to 1-ton of plastic for every 3-tons of fish by 2025, leading to massive environmental, economic, and health issues.

 

“Stemming the Tide: Land-based Strategies for a Plastic-Free Ocean”, is the Trash Free Seas Alliance’s signature initiative and Ocean Conservancy commissioned the McKinsey Center for Business & Environment to lead this comprehensive study. It was supported by Alliance members, the Dow Chemical Co., the American Chemistry Council, the Coca-Cola Co., World Wildlife Fund, and the Recycling and Economic Development Initiative of South Africa. It was also advised by technical pros in waste management, plastics and recycling as well as various government and multilateral organizations.

 

The study determined that although all countries with coastal access contribute to the ocean plastics problem, over half of the material leaked comes from five rapidly developing countries where production and consumption of plastics is outpacing local waste management capacity, in order of magnitude—China, Indonesia, Philippines, Vietnam, and Thailand.

 

This first-of-its-kind report identifies ways this global crisis can be diverted through a set of strategies rooted in stopping the leakage in the first place. It projects, that the implementation of a plan that starts at the local level can result in a 65% reduction of plastic pollution in these five countries, which would translate to a 45% reduction of plastics flowing in the ocean globally by 2025. Noting that there is no “one size fits all” solution, the study says that achieving this global reduction requires this mix:

 

• 26%: Close “leakage” points within the collection system by optimizing transport systems to eliminate illegal dumping, and closing or improving dump sites located near water ways.

 

• 23%: Increase waste collection rates by offering expanded service. Plastic waste is over twice as likely to end up in waterways and the ocean if uncollected.

 

• 16%: Keep leakage points closed by increasing the value of waste. Manually sort waste in rural areas to extract high-value plastic waste for recycling and convert the low-value waste into fuel for use in the cement industry. Deploy a mix of waste-to-fuel or waste-to-electricity technologies in cities.

 

In addition, the Alliance’s study stresses the need for working with industry to introduce new materials, recovery, and recycling approaches that will allow uncontrolled plastic waste to peak globally by 2030. Also, the strategies offered by the study are not plastic specific—they target the whole waste stream. If implemented today, the total program would entail a cost of $5-billion/yr.  The six priority areas of action for such a global program are:

 

• Ensure political leadership and commitment. Obtain real and meaningful commitments from national governments, governors and mayors to set and achieve ambition waste management targets.

 

• Secure on-the-ground wins. Provide local “proofs of concept” for integrated waste management approaches in a number of carefully selected “beta” cities.

 

• Get critical mass. Use lessons learned in beta cities to enable stakeholders to build a “best practice” transfer mechanism that can accelerate the transfer of global expertise to high priority cities.

 

• Pave the way for funding. Ensure that required project investment conditions are in place in the private, public, and multi-layer sectors. Work with industry on an innovative mechanism to strategically reduce capital costs and investment risks.

 

• Facilitate technology implementation. Equip state-of-the-art waste management technology provides the detailed data on waste composition, volume, and pathways; local infrastructure, wage structure; scavenger systems; feedstock supply security; energy prices, feed—in tariffs and off-take agreements to enable implementation of scale.

 

• Intensify the priority. Bring leadership and strategic focus on solutions to the ocean plastic challenge as part of the global policy agenda on the ocean.

 

 

 

 

Improved Stainless 420 ESR
Shell Polymers (Real)ationships start here ad
Windmoeller
Make Every Pellet Count
Registration is on Us
AM Workshop
We Love Powders NPE
New Tinius Olsen VectorExtensometer testing
Go Beyond Blending
Processing additives for Plastics recycling stream
TracerVM Flow Meter features many display options
Bole Machinery

Related Content

sustainability

Bringing Recycled Film into Food Packaging

FDA gives nod to recyclers, opening market to food safe packaging films from diverted materials.

Read More
sustainability

Honda Now Exploring UBQ’s Biobased Material Made from Unsorted Household Waste

UBQ is aiming to expand its reach for more sustainable automotive parts as well as non-automotive applications.

Read More
Thermoforming

Thermoforming PCR: An Equipment Supplier’s Pointers

Thermoforming PCR is not radically different from forming virgin, but variation in recycled materials can require extra care to get a consistent end result. Start by examining every aspect of the process from the sheet (and extrusion process if run inline) to the final trim.

Read More
Additives

At NPE2024, Follow These Megatrends in Materials and Additives

Offerings range from recycled, biobased, biodegradable  and monomaterial structures that enhance recyclability to additives that are more efficient, sustainable and safer to use.  

Read More

Read Next

Automation

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More
Extrusion

Understanding Melting in Single-Screw Extruders

You can better visualize the melting process by “flipping” the observation point so that the barrel appears to be turning clockwise around a stationary screw.

Read More
Extrusion Know How

How Polymer Melts in Single-Screw Extruders

Understanding how polymer melts in a single-screw extruder could help you optimize your screw design to eliminate defect-causing solid polymer fragments.  

Read More
Experience the Ultimate NPE