AM Workshop
Published

Industry Veteran Reflects on the History of Controls

  This year marks the 50th anniversary of Eurotherm, a global leader in controls systems for plastics processors of all kinds.

Share

 

This year marks the 50th anniversary of Eurotherm, a global leader in controls systems for plastics processors of all kinds. In light of this landmark event, we chatted with plastics-industry veteran Steve Schroeder, currently Eurotherm’s business development manager, to reflect on the history of controls and the advances that he has seen first-hand over the course of his 38-year career in the industry.

 

Plastics Technology: Steve, Eurotherm is celebrating a landmark anniversary this year—50 years in operation. There must have been many changes that you have seen happen in the industry since you started out as well as for Eurotherm?

 

Schroeder:  Yes, Eurotherm has come a long way, diversifying into other industrial electronics areas creating many world firsts with many innovative product developments. What still is clear to our engineers today, is that customer process problems and finding ways to solve them have always been the key focus point enabling those leaps forward for so many years.  So it’s no surprise then that many Eurotherm employees have been with the business for most of their careers. 

 

Plastics Technology: You started working in plastics with EPCO, which made injection molding machines. Now, 38 years ago the technology would have been very different? What stands out for you?

 

Schroeder: Back then, most machines were run with relays, timers, limit switches and manual throttle valves.

 

Plastics Technology: And what were you using at that time for plastics processing?

 

Schroeder: We offered as a standard, the Barber Colman (now Eurotherm) 520 temperature controller that was smaller than its predecessor and more precise in control than most controls that were on the market. It was just about that time, in 1974, Barber Colman introduced the Maco IIB rack controller with thumbwheel switches for timers. ‘What a fantastic advancement,’ we thought! It replaced the vast number of relays needed and ran all the sequences through one control rack. It soon became the standard offering on all our new machines. Shortly after, we were retrofitting older machines with the Maco IIB system as well.

 

Plastics Technology: And what developments came next to improve upon that?

 

Schroeder: It wasn’t too much later in 1978 that the Maco IV controller was released with a 5-in. display screen, push buttons, built-in temperature control, closed-loop process control and a memory card that was about the size of a credit card that held all the setup of one mold.  What we had for the time was a fast operating control with leading edge technology!

 

Plastics Technology: Like today’s smart phones and computers, technological advances and competition must have been running at a quick pace in our industry. What was the next advancement for Eurotherm?

 

Schroeder: It sure was. In fact, just five years later in 1983, the futuristic Maco 8000 was launched.  The first truly distributed, modular plastics machine control system with its ‘touch screen’ (actually horizontal/vertical grid pattern) operator stations and its many single, large card holding plastic modules that occupied a vast amount of cabinet space. Oh, and let’s not forget the ‘8-Track Tape’ sized, single mold set up memory cartridge. It was faster than the previous offering and many of the North American OEMs began using it as their main control in various formats.

 

As the leading remanufacturer and retrofitter in the industry, we offered it in a conversion package with a hydraulic modification to run closed-loop process control for both applications. This helped molders bring their machines up to the current standards for plastic processing without buying new machinery.

 

Plastics Technology: As machines became more sleek in design and manufacturers were downsizing footprints, cabinet space was a big issue as most cabinets were large to house all those modules. What change came about for Eurotherm to compensate?

 

Schroeder: It was about eight years later, in 1991, that the single rack Maco 4500 came along with its updated 12-in. screen, integrated pushbuttons and small memory cartridge that held up to 15 mold set ups.  And in 1996, our patented Impact closed-loop process control feature was introduced as the first automatic adaptive tuned injection process control algorithm and it became a huge seller. The Maco 4500 was sleek looking, reduced the amount of cabinet space and wiring that was required with previous controls, and it was fast. That first IMPACT design still stands out amongst all the innovations over this time. Its reputation and acceptance as the best in its field rapidly grew and remained for many years to come.

 

Plastics Technology: Since those huge advancements was there anything since that had the same impact?

 

Schroeder: In fact, you could argue that it wasn't surpassed  until  2006 and the release of the Maco Compact and its great number of advancements in size, a full (this time real) touchscreen HMI and a reduced footprint that made the previous offering look huge in comparison. It stores over 500 recipes internally, has more advanced features that all other systems combined with response and processing times measured in milliseconds. Now that’s fast!

 

Plastics Technology: Steve, it has been interesting to hear from your perspective so what do you see happening next?

 

Schroeder: When I started in this industry, I never thought I would see such an evolution of controlling machinery processing like I have. It’s 2015 and I say wholeheartedly that the advancements in machinery control systems is still running at a rampant pace. Just reflecting upon the recent NPE, the amount of new and highly advanced control systems on new machines was amazing. Features that even had some looking like large iPhones.

 

It will be interesting to say the least, to see where it goes next. I think that there is no way to accurately predict the future in controls but to say they will certainly advance at the continuing pace.

 

Plastics Technology: And so, what is next for Eurotherm? 

 

Schroeder: We will continue to design and develop new products and systems to keep up with the demands of plastic processing.  And, if the last 50 years is anything to go by, it will be impressive. Especially with the added strength and scope that the integration with Schneider- Electric offers to Eurotherm. This means for us, truly anything is possible. If I may add, I have to say that all these years, it has been a real pleasure to have been involved both directly and indirectly with Eurotherm products and their people in working together to enhance the operation and functionality of molding machinery and the processing of plastic.

We Love Powders NPE
New Tinius Olsen VectorExtensometer testing
Insert molding automation
Improved Stainless 420 ESR
Trust the experts for fast & efficient changeovers
Blending Revolution
TracerVM Flow Meter features many display options
pipe and profile extrusion chemical foaming agents
New 2024 Twin Screw Report
Shell Polymers (Real)ationships start here ad
Cranes, Conveyors, Racks, Loaders, Accessories
LKIMM
Registration is on Us
Windmoeller
Gardner Business Media, Inc.
Orbetron new for 2024 micro twin screw feeder

Related Content

processing tips

The Importance of Barrel Heat and Melt Temperature

Barrel temperature may impact melting in the case of very small extruders running very slowly. Otherwise, melting is mainly the result of shear heating of the polymer.

Read More
Extrusion

Understanding Melting in Single-Screw Extruders

You can better visualize the melting process by “flipping” the observation point so that the barrel appears to be turning clockwise around a stationary screw.

Read More

Cooling the Feed Throat and Screw: How Much Water Do You Need?

It’s one of the biggest quandaries in extrusion, as there is little or nothing published to give operators some guidance. So let’s try to shed some light on this trial-and-error process.

Read More

The Importance of Viscosity in Melting

The calculations required to determine the right melt temperature for each polymer are complicated. Knowing the power-law coefficient and the consistency index of the polymer you run might prove useful.  

Read More

Read Next

Extrusion Know How

Troubleshooting Screw and Barrel Wear in Extrusion

Extruder screws and barrels will wear over time. If you are seeing a  reduction in specific rate and higher discharge temperatures, wear is the likely culprit.   

Read More
industry 4.0

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More
Recycling

Advanced Recycling: Beyond Pyrolysis

Consumer-product brand owners increasingly see advanced chemical recycling as a necessary complement to mechanical recycling if they are to meet ambitious goals for a circular economy in the next decade. Dozens of technology providers are developing new technologies to overcome the limitations of existing pyrolysis methods and to commercialize various alternative approaches to chemical recycling of plastics.

Read More
AM Workshop