Medical Device Production to See Accelerating Growth
Indicators are positive over the next six to 12 months.
A week prior to this writing, the Supreme Court gave its support to the Affordable Care Act (ACA; aka Obamacare) by affirming the legality of nationwide subsidies. Since the ACA was passed, the medical-device and supply industry has been filled with uncertainty. This uncertainty has led to significant ups and downs and changes in direction in the industry over the last two years.
In February 2015, medical-care spending and our medical business index were pointing to slower growth in medical-device production. But, now the leading indicators are pointing in the exact opposite direction, toward accelerating growth in medical production.
Since the early 1970s, real medical-care spending has increased on a virtually straight line. However, once the ACA was passed, the slope of that straight line increased, meaning the rate of growth in medical-care spending increased.
The one-month rate-of-change shows that real medical-care spending has increased by 5% or more in each of the last five months. The last time that happened was June through October 2002. As a result, the annual rate of change in medical-care spending has reached 4.1%, which is up from 2% in November 2013.
Medical-care spending is a good leading indicator of medical-equipment/device production. In medical, production is generally on a two-year cycle. That is, from a peak or trough in the rate of change it takes about two years to hit the next peak or trough. But the amplitude of the peaks and troughs tend to rise and fall with the direction of medical-care spending. In 2014, medical-device production grew at an accelerating rate in response to the accelerating growth in medical-care spending. Yet despite the rapid acceleration in medical-care spending, production has seen slower growth in 2015.
Given the strength of the surge in medical-care spending, it is possible that production will hit a growth rate of 7% to 9% around the end of 2016.
Our medical business index has been fairly positive in 2015. The new orders index has been above 60% in three of the first five months. Since January 2014, production has increased in every month but three. And in two of those three months it was flat.
Significantly, backlogs have increased in three of the last five months. This indicates that capacity utilization should be increasing and that there will be a greater need for new devices as we move into 2016.
The overall index would be seeing even stronger growth, except that employment and exports have been trending down for almost a year. Exports have fared poorly over this time as the dollar has generally gotten stronger relative to all world currencies. Supplier deliveries have lengthened substantially, which indicates strength throughout the medical supply chain. Finally, prices received and future business expectations have been on a slight uptrend since May 2013.
Related Content
Prices Up for All Commodity Resins, Including ABS, PC, Nylons 6, 66
Reversal of some factors driving prices up could change the trajectory in the second or third quarter.
Read MoreExtrusion: 'Melt-Blown' Fiber: What You Need to Know to Enter the Face Mask Market
Coronavirus pandemic has made extrusion processors curious about entering the face-mask market. But melt-blown fiber is very different from most other extrusion processes and requires specialized equipment.
Read MoreUse Automated Fever Scanning to Protect your People and your Business
This new non-contact temperature screening system from MachineSense is quick and easy to use. It provides an added level of health protection for employees and legal protection for the business.
Read MoreProcessing Biopolymers for Rigid Sheet & Thermoforming
Newly available cast sheet and thermoforming grades of Mirel biobased polymers open up a new range of applications in containers and other formed parts where renewable content and biodegradability are desired.
Read MoreRead Next
People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems
Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.
Read MoreLead the Conversation, Change the Conversation
Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.
Read MoreHow Polymer Melts in Single-Screw Extruders
Understanding how polymer melts in a single-screw extruder could help you optimize your screw design to eliminate defect-causing solid polymer fragments.
Read More