Bole America
Published

Medical Market Demand Driven by Policy for Now

Wood on Plastics

How will 'Obamacare' impact the medical market for plastics processors? It's hard to see how the medical industry will not enjoy robust demand growth for years to come. On the other hand...

Share

I am writing this column just a few days after the U.S. Supreme Court handed down its decision that essentially upholds the vast majority of the Affordable Care Act (a.k.a. the ACA or Obamacare). After listening to a voluminous amount of analysis and debate, I am comfortable saying that this piece of legislation, as well as the subsequent Supreme Court decision, will have a profound effect on the market for medical goods and services in this country. However, I am decidedly unomfortable now in trying to forecast just what that effect will be and how this legislation will ultimately impact the fundamental trends in medical markets.

In the short term, my advice is to expect business as usual. Most medical suppliers and manufacturers already have a plan in place that assumed the law would be upheld. It is, after all, the law of the land, and the industry really had no choice but to make investments to prepare for the legislation. The possibility remains that the Republicans will sweep into power after the November elections, and the whole act will be repealed in 2013. But again, it would not be prudent to bet the ranch on this outcome.

So assume that the Affordable Care Act will proceed as planned. And for many of the manufacturers in the medical industry, this will be good for business. That’s because it has the potential to bring 40 to 50 million new customers into the market. The issues pertaining to healthcare in this country are based on three things: quality, access, and cost. The Affordable Care Act primarily deals with access by mandating that everybody buy medical insurance and by giving access to those who otherwise could not afford it. So once all of the citizens that currently do not have insurance are insured, it is quite likely that the demand for medical goods will rise.

This influx of newly insured customers will reinforce the market fundamentals that were already spurring demand for medical products in America. These fundamentals include a growing population, an aging population, and rapid innovation in new medical goods and services. On the surface, it is hard to see how the medical industry will not enjoy robust demand growth for years to come.

But there is a downside to all of this, and the critics of Obamacare may ultimately be proved right. Simply put, the costs of healthcare in the U.S. are currently too big for the economy to support, and these costs are rising at a rate that is substantially higher than the rate of growth for the overall economy. Proponents of this legislation promise that it will actually lower the total cost of healthcare in this country, but there is not nearly enough credible data yet to support this claim.

It might work as they say it will, but my educated opinion is that it will not. The ACA is fraught with assumptions that may eventually prove to be flawed, and this may ultimately be its undoing. For instance, in order for this plan to work, everybody must purchase health insurance. Those who do not will have to pay a penalty on their income tax. The Supreme Court has deemed this a legal form of taxation, but the amount of the penalty is very low—only $695 at its worst. This penalty is far lower than the cost of buying a policy. So most young, healthy people may still make the choice to pay the penalty and not buy insurance. This means that only sick people will opt in, and the costs will rise dramatically, and the whole thing will eventually fail.
 

WHAT THIS MEANS TO YOU
 

•The ACA includes a new tax on some medical devices. Since it is likely that this tax will eventually be pushed on to consumers, it should not have much of an effect on medical processors and OEMs.

•The trend of medical manufacturers “reshoring” production and assembly processes from low-wage countries back to the U.S. will continue to gain momentum.

•Regardless of the ultimate outcome of the ACA, the only trend in healthcare that is sustainable over the long-term is towards “prevention” and away from “cure.

Shell Polymers (Real)ationships start here ad
Insert molding automation
Improved Stainless 420 ESR
NPE2024: The Plastics Show
Processing additives for Plastics recycling stream
Trust the experts for fast & efficient changeovers
Windmoeller
quick mold change solutions injection molders
Orbetron new for 2024 micro twin screw feeder
We Love Powders NPE
Make Every Pellet Count
Gardner Business Media, Inc.

Related Content

Extrusion

DuPont Buys Medical Product Manufacturer Spectrum Plastics

Purchase price of $1.75 billion for leading supplier of extruded, molded, and 3D printed medical components.  

Read More
Medical

New Cap for Child-Resistant Pill Bottles Is Senior-Friendly & Saves Resin

Exclusive lightweight cap design can be removed simply pushing down on the center. No gripping or twisting needed.

Read More

Allegheny Performance Plastics to Enter Health Care Sector

The custom molder has secured multiple projects in health care and will be adding cleanroom and white-room spaces, as well as injection molding machines, in support.

Read More

Consistent Shots for Consistent Shots

An integral supplier in the effort to fast-track COVID-19 vaccine deployment, Retractable Technologies turned to Arburg and its PressurePilot technology to help deliver more than 500 million syringes during the pandemic.

Read More

Read Next

Injection Molding

Processor Turns to AI to Help Keep Machines Humming

At captive processor McConkey, a new generation of artificial intelligence models, highlighted by ChatGPT, is helping it wade through the shortage of skilled labor and keep its production lines churning out good parts.

Read More
Automation

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More
Trust the experts for fast & efficient changeovers