Packaging Demand Has Probably Peaked
Consumers are spending less on food and beverage consumption.
The use of plastics packaging is closely tied to production of consumer goods and the food and beverage processing industry. Trends in the economic data that are leading indicators for production in these two industries provide clues as to what will happen to demand for plastics packaging.
Real disposable income is the earliest leading indicator we track for both industries. Disposable income hit all-time highs in recent months. Recently released data even revised upward the level of disposable income reported for the first quarter of 2015. Over the last five months, the one-month rate of change in disposable income has grown faster than the historical average. The annual rate of change shows that disposable income has grown at a rapidly accelerating rate since January 2014.
Yet the accelerating growth in consumer income has not resulted in increased spending. Consumer-goods spending dipped below its average one-month rate of growth in April. And while the annual rate of growth has accelerated, it has not increased as much as expected. This is likely because spending remained robust in 2013 and 2014, even as disposable income saw significantly slower growth. Because consumer-goods spending stayed high with such slow growth in incomes, don’t expect to see accelerating growth in consumer-goods spending, even if disposable income continues to grow faster.
Since 2014, food and beverage consumer spending has moved in the opposite direction of incomes. In fact, food and beverage spending has contracted at an accelerating rate throughout 2015. It’s quite a rare occurrence for food and beverage spending to contract. But historical data shows that disposable income leads food and beverage spending by six to 12 months. So we should see food and beverage spending contract at a slower rate very soon and then perhaps move into accelerating growth in the second half of 2015.
So, the future trend in food and beverage spending seems to be more positive than in consumer-goods spending. Spending tends to lead production by up to six months. Consumer-goods production has seen decelerating growth over the last six months. This is surprising, given the trend in consumer-goods spending. It’s possible that we could see some growth in production of consumer goods. The more likely scenario is that the rate of growth in production will remain relatively unchanged. So packaging demand will probably remain relatively stable in future months.
Despite the contraction in food and beverage spending, production has seen rapidly accelerating growth. Still, I don’t think we will see corresponding growth in production, at least until spending and production come into a better balance. This means we could be entering a period of relatively weaker demand for packaging in the food and beverage industry.
Consumers are getting fatigued despite the increase in their incomes. So look for consumer spending to be relatively soft. This means that demand for packaging likely peaked at the end of the first quarter of 2015.
Related Content
Colored PET: Pretty To Look At; Headache For Recyclers
Plastics Recyclers of Europe believes that 'colorful’ future trends will weaken the image of PET as a recycled product.
Read MoreBOPE Takes Aim at BOPP & BOPET Films
Nova’s new biaxially oriented HDPE is seen as a more easily recyclable monomaterial contender versus multilayer BOPP or BOPET films.
Read MoreHow to Dry PET for Container Applications
PET is extremely hygroscopic, highly moisture sensitive, and one of the toughest challenges to dry. Here are the basic principles of doing it right for rigid packaging applications
Read MoreIn-Line Radar-Based Measurement of Extruded C900 PVC Pipe Reduces Material Cost, Improves Quality
New radar-based measurement technology enables processors to extrude higher-quality pipe with less material. With an automated closed-loop control system you’ll get more output and less scrap to significantly lower costs.
Read MoreRead Next
Troubleshooting Screw and Barrel Wear in Extrusion
Extruder screws and barrels will wear over time. If you are seeing a reduction in specific rate and higher discharge temperatures, wear is the likely culprit.
Read MorePeople 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems
Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.
Read MoreUnderstanding Melting in Single-Screw Extruders
You can better visualize the melting process by “flipping” the observation point so that the barrel appears to be turning clockwise around a stationary screw.
Read More