Konica Minolta the leader in measuring color
Published

Plastic Bag Bans: The Trend That Can’t Stop, Won’t Stop?

On April 28, the European Parliament gave its final approval for the previously agreed legislation to reduce the use of single-use plastic carrier bags.

Share

On April 28, the European Parliament gave its final approval for the previously agreed legislation to reduce the use of single-use plastic carrier bags.

 

EU member states have a choice: either to take measures to reduce annual average consumption of plastic bags to 90 lightweight bags per citizen by the end of 2019 and to 40 by the end of 2025; or ensure that by the end of 2018, no more lightweight plastic bags are handed over free of charge to shoppers.

 

Bag bans aren’t just reserved for the EU as several U.S. cities have also banned plastic bags and the list seems to keep growing. And while there are stories that come along such as Arizona announcing it has passed a ban on the bans of plastic bags (did you get that?), there’s somewhere like Sacramento announcing the city will enact a plastic bag ban.

 

In other words, plastic bag bans are not going away anytime soon.

 

It’s estimated that the U.S. goes through 100 billion plastic shopping bags annually. The average person uses about 326 plastic grocery bags per year. In 2012, the category of plastics, which includes bags, sacks, and wraps was recycled at about 12%, according to the EPA. Plastic bags are 100% recyclable, but there are currently a lot of factors working against the lightweight packaging. For example:

 

HUMAN ERROR

People leaving their bags behind and as a result, plastic bags are found on the side of highways, in the ocean and just about everywhere else you can think of. Stop being trashy, people!

 

PROBLEMS WITH MACHINERY 

Some people try to do the right thing by putting plastic bags in the recycling bins, but they are unknowingly creating another issue. The bags often clog the sorting machinery at recycling facilities, forcing workers to shut down the process to remove the tangled bags. Most recycling facilities are set up to handle rigid materials such as aluminum cans, glass bottles, plastic containers and lids, metal cans, cardboard/paper, etc.  Plastic bags require a different collection system and processing equipment that many curbside recycling programs don’t provide.

 

GROCERY STORE DROP OFF - POSSIBLE ANSWER?

There is some movement on recycling plastic bags. Many retail chains such as Walmart and Target do provide collection bins for plastic bags at their main entrances. Novolex Hilex Poly’s Bag-2-Bag recycling program collects more than 40 million pounds of post-consumer bags and film each year. Collected bags are gathered into bales and transported to the Novolex recycling center in North Vernon, IN.

 

Novolex says on its website that Bag-2-Bag works best when stores have two key factors working for them. “First, they have access to a logistics system that can back haul the bags for consolidation and baling. This typically happens with a chain of stores,” the company said. “Secondly, Bag-2-Bag works best with stores where customers visit them on a weekly basis so that recycling can become part of their routine. This is why the most successful programs have been with grocery stores.”

 

While the retail collection model is working to an extent, we all know that plastic bag recycling must increase as a whole.

 

THE FUTURE?

Perhaps Materials Recovery Facilities (MRFs) could invest in equipment that enables them to recover plastic bags in the MRF environment. But that is costly.   

Another potential solution: plastics-to-oil. Researchers at the University of Illinois claim that plastic bags can be converted into diesel fuel and other petroleum products. Previous studies have used pyrolysis to convert plastic bags into crude oil. However, the university researchers fractionated the crude oil into different petroleum products and tested the diesel fractions to see if they complied with national standards for ultra-low-sulfur diesel and biodiesel fuels. The researchers were able to blend up to 30% of their plastic-derived diesel into regular diesel, “and found no compatibility problems with biodiesel,” according to the university.

 

Perhaps one of those solutions will lead the charge to stop the plastic bag ban trend? Time will tell. 

Vecoplan
AM Workshop
mold, mould track, digital tracking, molding
Guill - World Leader in Extrusion Tooling
Plastics Recycling Latam
Shuttle Mold System
Konica Minolta CM-36dG
Realationships
structural foam molding chemical foaming agents
Dri-Air
Maguire Ultra
Make Every Pellet Count

Related Content

Recycling

Scaling Up Sustainable Solutions for Fiber Reinforced Composite Materials

Oak Ridge National Laboratory's Sustainable Manufacturing Technologies Group helps industrial partners tackle the sustainability challenges presented by fiber-reinforced composite materials.

Read More
Additives

Compatibilizers Aid Recycling & Upcycling of Mixed Resins

Compatibilizers are proving their worth in boosting critical properties such as impact/stiffness balance of PCR and PIR blends of polyolefins and other plastics.      

Read More

Recycled Material Prices Show Stability Heading into 2023

After summer's steep drop, most prices leveled off in the second half.

Read More
sustainability

Purpose-Built System Enhances Capacity and Flexibility for Recycler

A Boston recycler invested in a turnkey shredding, granulation and elutriation system to expand its plastics reclaim business.

Read More

Read Next

processing tips

People 4.0 – How to Get Buy-In from Your Staff for Industry 4.0 Systems

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Read More
Extrusion Know How

Troubleshooting Screw and Barrel Wear in Extrusion

Extruder screws and barrels will wear over time. If you are seeing a  reduction in specific rate and higher discharge temperatures, wear is the likely culprit.   

Read More
Injection Molding

Processor Turns to AI to Help Keep Machines Humming

At captive processor McConkey, a new generation of artificial intelligence models, highlighted by ChatGPT, is helping it wade through the shortage of skilled labor and keep its production lines churning out good parts.

Read More
Vecoplan USA