Blog

Celebrating a Solution for a Sticky Situation

By:
18. February 2013

In MMT we focus a lot on surface treatment challenges and solutions, so this little tidbit caught my attention.

 

Life changed 60 years ago for a man selling steel to mold builders when the need for "unsticking" plastic parts from molds revealed an opportunity for a new product--silicone oil in an aerosol can. This evolved into the first mold release – and foundation – of the new Percy Harms Corporation, predecessor of Slide Products, which celebrates its 60th anniversary in the injection molding industry this year.


It was 1953 when young Percy Harms was selling steel to mold builders and saw a need in the then-new plastics and injection molding industry to help them prevent plastic parts from sticking in the mold.  That need drove Percy to approach a cousin working in the aerosol industry about putting silicone oil in an aerosol can.

 

To commemorate Slide’s 60 years, the company is having two new iPad giveaways. To participate, qualified industrial users should click here and correctly answer one trivia question about Slide Products and submit contact info before June 30.  A second question will be posted from July 1 to December 15, 2013. The first winner will be announced in July, and the second before year end. Only one entry per person per giveaway is allowed.


“These giveaways are our way of thanking customers for 60 years of success,” says Slide Products President Michael Muth.


Slide explains, that as the company’s sales grew, so did its staff, with sons Jim and Henry joining Percy’s business in 1963, and the company moving in 1974 to its current corporate and manufacturing facility in Wheeling, IL. In 1993, the company changed its name to Slide Products, adopting the name of one of their most popular product lines and the nickname used by its customers and distributors.


“After the EPA issued its final assessment in September 2011 characterizing trichloroethylene (TCE), one of the most widely used chlorinated solvents nationwide, as carcinogenic, we eliminated not just TCE, but all chlorinated solvents from our products,” says Michael. Not a single product in the company’s entire line has any type of chlorinated solvent.


They also maintain a close relationship with customers and distributors by employing an extensive network of locally based distributors worldwide who know customers by name and can provide products and technical support quickly and easily.

 

So help them commemorate by taking your turn at some trivia!

 

Comments are reviewed by moderators before they appear to ensure they meet Plastic Technology’s submission guidelines.
blog comments powered by Disqus


twitter

All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244