Home » Common Questions » Will I have a problem with high pack pressure and times?

Will I have a problem with high pack pressure and times?



Newer electric machine designs and technology today have motors and drives with more power capability than ever before. But while an electric machine being overmatched has become a very infrequent issue (less than 1%), there are still cases where the combination of part design and resin types can cause the injection motor to become overloaded. If there’s some uncertainty about this possibility in a given situation, machinery manufacturers including Milacron frequently have some alternative design combinations to address the issue. If you have a concern, you should share the details up front with your machine manufacturer.

Ask the Expert

Steve Allen

Director of Product Management & Support

All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244