Guill - World Leader in Extrusion Tooling
Published

Clearing the Red Tape for Driverless Cars Cuts Both Ways

New technologies and smart legislation could initiate a new round of purchases.

Share

It should be no surprise to anyone that the vast majority of existing U.S. Federal motor-vehicle safety rules have been written with the assumption that a qualified human is behind the wheel. For this reason, autonomous vehicles have moved into a legal gray area. As the technology progresses and testing is conducted on active roadways, issues of safety and liability must be addressed quickly. In response, some states are crafting their own legislation; however, the end result will be a hodge-podge of state-by-state regulations that restrict and regulate the safety and performance of autonomous vehicles, where unified federal regulation would be preferable for the industry.

To prevent a disadvantageous state-by-state regulatory outcome, the House Energy and Commerce Committee is expected to unveil legislation to smooth the way for the inclusion of autonomous vehicles on public roads. Simultaneously, the Senate Commerce Committee is also crafting legislation to help smooth the regulatory road for the expanded use of autonomous cars with the help of Sen. Gary Peters (D-Mich.).

The introduction of reasonable legislation allowing for the safe incorporation of autonomous vehicles onto public roads cannot come soon enough. Automotive industry data shows a disconnect between new orders and the value of shipments. The 2017 ratio of the value of new orders to shipments (at 6.6 x) is 33% higher than the average ratio since 1992 of 4.9 x. These results suggest that manufacturers are significantly hedging their output despite strong new-order demand.

Manufacturers have several reasons for limiting their output. In general, the sedan and small-car markets have lacked profitability for the big OEMs, especially as incentives hit all-time highs in 2017. According to J.D. Power, incentives in 2017 are expected to exceed $4000, approximately a 15% increase over 2016 incentive levels.

Moreover, automotive credit data shows several concerning signs. According to the latest Federal Reserve data, the average maturity of new car loans is more than 67 months, in part due to the growing popularity and availability of 72- and 84-month term auto loans in recent years. Such long-term loans mean that the vehicle loses value faster than the amount of the loan outstanding, resulting in the owner having negative equity in the vehicle.

If the Fed begins raising interest rates to combat inflation and normalize the economy, interest rates will certainly increase. Fed data measuring the average finance rate of new-car loans shows that interest rates in a normal interest-rate environment could easily reach 7% or more, significantly more than that the 5.1% rate recorded in the first quarter of 2017. Even with exceptionally low interest rates, financing flows for motor-vehicle loans have been falling since 2015, and in 2017 those flows turned negative.

The question becomes: Have consumers exhausted their appetite for new cars, or is this simply a pause before a new wave of purchasing occurs? Regardless, there is much that can be done to advance the industry through new technologies and smart legislation.


ABOUT THE AUTHOR: Michael Guckes is the chief economist for Gardner Business Intelligence, a division of Gardner Business Media (Cincinnati, OH US). He has performed economic analysis, modeling and forecasting work for nearly 20 years among a wide rangeof industries. Michael received his BA in political science and economics from Kenyon College and his MBA from Ohio State University. Contact (513) 527-8800; mguckes@gardnerweb.com; gardnerweb.com.

Shuttle Mold System
Make Every Pellet Count
RoyAlloy Stainless Mold Base Steel
Konica Minolta
Maguire Ultra
Create custom Smartflow assemblies on-line, 24/7.
Guill - World Leader in Extrusion Tooling
Vacuum conveying powders to extruders compounding
Konica Minolta CM-36dG
Insert molding automation
Realationships
Dover Clear

Related Content

Automotive

ABC Technologies to Acquire Windsor Mold Group Technologies

The Tier One automotive supplier with compounding and blowmolding machine capabilities adds the 50-yr-old molder and moldmaker.

Read More
Automotive

Atop the Plastics Pyramid

Allegheny Performance Plastics specializes in molding parts from high-temperature resins for demanding applications as part of its mission to take on jobs ‘no one else does.’  

Read More
Automotive

Celanese to ‘Shine’ at CES 2023 with Expanded Portfolio of Materials

With it acquisition of DuPont’s engineering resins, Celanese’s resin solutions for automotive electrification, e-mobility and consumer electronics are plentiful.

Read More

Automotive Awards Highlight ‘Firsts,’ Emerging Technologies

Annual SPE event recognizes sustainability as a major theme.

Read More

Read Next

sustainability

Lead the Conversation, Change the Conversation

Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.

Read More
Recycling

Advanced Recycling: Beyond Pyrolysis

Consumer-product brand owners increasingly see advanced chemical recycling as a necessary complement to mechanical recycling if they are to meet ambitious goals for a circular economy in the next decade. Dozens of technology providers are developing new technologies to overcome the limitations of existing pyrolysis methods and to commercialize various alternative approaches to chemical recycling of plastics.

Read More
Extrusion

How Polymer Melts in Single-Screw Extruders

Understanding how polymer melts in a single-screw extruder could help you optimize your screw design to eliminate defect-causing solid polymer fragments.  

Read More
Plastics Recycling Latam