A hot-runner nozzle for direct side gating of multiple long, slim, or tube-shaped parts is new from Ewikon Molding Technologies Inc., East Dundee, Ill.

Click Image to Enlarge

A hot-runner nozzle for direct side gating of multiple long, slim, or tube-shaped parts is new from Ewikon Molding Technologies Inc., East Dundee, Ill. The HPS III-MH nozzle is suited to medical syringes or pipettes or packaging closures. It uses a heat-conductive tip insert to gate directly onto the part surface while avoiding cold slugs. Tips are installed from the mold parting line. A special sleeve around the tip helps create a melt seal at the gate. The nozzle is offered in a radial version that allows gating of up to eight parts, and a linear version that has two rows of four tips, each with a minimum of 11 mm between the cavities. (847) 844-9351 • www.ewikonusa.com

Ewikon Hotrunner Systems
1051 E. Main St. East Dundee, IL 60118
Phone (847) 844-9351 Fax (847) 844-9352