A ready-to-go line of hot halves that are fully tested, wired, and ready to bolt onto the mold is new from Gunther Hot Runner Systems Inc., West Chicago, Ill.

A ready-to-go line of hot halves that are fully tested, wired, and ready to bolt onto the mold is new from Gunther Hot Runner Systems Inc., West Chicago, Ill. The new hot-half designs are available with a choice of nozzle styles in hot-tip or valve-gate designs with bore diam. from 13.6 to 22 mm and two to 96 drops. The system typically uses Gunther's STT nozzle, which has a thermocouple welded close to the tip for improved sensing accuracy and minimal temperature deviation from cavity to cavity. Nozzles also are removable from the front after removing the cavity plate. The design eliminates the need for a support plate, which saves about 30 mm in thickness. Tel: (630) 293-4650 . www.gunther-usa.com

Gunther Hot Runner Systems
1150 Powis Rd Unit 7 West Chicago, IL 60185
Phone (630) 293-4650 Fax (630) 293-4670