The Intelligent Magnetic Clamping (IMAG) system from Staubli Corp., Duncan, S.C., now has additional monitoring features and can be used with thinner back plates (13 mm) than before.

The Intelligent Magnetic Clamping (IMAG) system from Staubli Corp., Duncan, S.C., now has additional monitoring features and can be used with thinner back plates (13 mm) than before. IMAG now displays the holding force and compares it with the opposing forces on the mold. A warning is displayed if magnetic holding force is insufficient. IMAG records initial holding force the first time a mold is used and uses that value for comparison when the mold is used again. The system gives a warning if holding force is reduced by 7% or if the platen temperature rises too high. Magnetic sensitivity has been improved and IMAG will shut down the press if any part of the mold moves 0.0001 in. from the magnetic platen. (800) 845-9193 • www.staubli.com

STAUBLI Corporation
201 Parkway West P. O. Box 189
Duncan, SC 29334
Phone (864) 486-5438 Fax (864) 486-5497