Synventive Molding Solutions, Peabody, Mass., has two new hot-runner products: Model 06E threaded/screw-fit nozzle and model PNC30 pneumatic bolt-on actuator for valve gates. Model 06E extends the company’s line of small, threaded, leak-proof manifold nozzles. Available with thermal gate or valve gate, it has a 6-mm fl ow bore (with 20-mm mold cut-out) and is designed for small shots of up to 100 g/nozzle. Since the nozzle is threaded into the manifold, a leak-proof system is provided without critical stack-up dimensions to maintain. These nozzles are externally heated and come in lengths from 60 to 200 mm. Heaters are easily
replaceable and have integrated, replaceable thermocouples. When the new 06E nozzles are used as a valve-gate system in conjunction with the new PNC30 bolt-on actuator, the complete hot-runner system is supplied pre-wired and pre-hosed for simple “plug-’n-play” mold installation. The PNC30 has a customer-supplied cover plate that allows the valve pin to be removed or adjusted without removing the top clamp plate.
(978) 646-3482 • synventive.com
Synventive Molding Solutions
10 Centennial Dr. Peabody, MA 01960
Phone (978) 750-8065 Fax (978) 281-5882
Editor PickBlock Cavities and Keep Molding
It goes against conventional wisdom, but molding with blocked cavities can be done while maintaining quality with the help of appropriate in-cavity sensors and process-control software.