NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: All Electric & Hybrid Machines

PUBLISHED: 5/22/2017

INJECTION MOLDING: New Range of All-Electric Machines

Filling out a line of small to mid-size machines with new, more efficient servo motors.


PUBLISHED: 3/24/2017

INJECTION MOLDING: All-Electric Secondary Injectors in Vertical or Horizontal Format

Fanuc auxiliary injection units now available in the Americas.


PUBLISHED: 1/26/2017

INJECTION MOLDING: Medium-Pressure Machine For Large Solid or Foam Parts

Large-shot, 800-ton press straddles the gap between standard injection and structural-foam machines.


PUBLISHED: 9/22/2016

INJECTION MOLDING: Two New Closure Systems Shown at K 2016

72 mineral-water caps in 2.4 sec.


PUBLISHED: 4/14/2016

INJECTION MOLDING: ‘Entry-Level’ Electric Machines With Good Price/Performance Ratio

Economy through standardization marks this new electric series.


PUBLISHED: 3/3/2016

INJECTION MOLDING: Revamped Line Promises Greater Injection Speed, Lower Energy Use

Linear guides throughout and a purpose-built ball screw contribute to greater speed and efficiency for Toshiba’s new all-electric line.


PUBLISHED: 1/12/2016

INJECTION MOLDING: New Electric Press Series Geared for Mid-Sized Molding

Highly spec'ed presses handle bigger, heavier molds for mid-sized automotive and other parts.


PUBLISHED: 12/23/2015

INJECTION MOLDING: Enhanced Auxiliary Injection Units

New software, radial-mount options, and other upgrades.


PUBLISHED: 12/23/2015

INJECTION MOLDING: New Hybrid Micromolding Machine With Servohydraulic Clamp

Dial down the tonnage as low as 5%, or 1.5 tons.


PUBLISHED: 10/23/2015

INJECTION MOLDING: Energy-Saving Presses and Medical Systems Debut at Fakuma

Larger models complete servohydraulic series; presses get cleanroom qualification.


RSS RSS  |  Atom Atom