Ultra-High-Speed Electric Press Targets Thin-Wall Jobs

A new ultra-high-speed/high-pressure electric injection press specially designed for thin-wall molding comes from Nissei America Inc., Anaheim, Calif.
New Product Announcements Published: 7/1/2010

Electric Machine Training Course

A new, three-lesson course on “Mastering Electric Molding Machines” will beavailable by July 30 from Paulson Training Programs, Inc., Chester, Conn.
New Product Announcements Published: 7/1/2010

Online Training to Operate All-Electric Injection Machines

Tthere is still need to educate molders on how to set up and operate all-electric injection machines.
New Product Announcements Published: 5/1/2010

Plug-'N-Play Hot-Runner Systems for Small Parts

Synventive Molding Solutions, Peabody, Mass., has two new hot-runner products: Model 06E threaded/screw-fit nozzle and model PNC30 pneumatic bolt-on actuator for valve gates.
New Product Announcements Published: 5/1/2010

New HNBR Rubber for LIM

WEB EXCLUSIVE: Now there’s something besides liquid silicone rubber for liquid injection molding, or LIM.
New Product Announcements Published: 4/1/2010

Medium-Large Electric Presses Slash Cycle Time, Energy Use

JSW Plastics Machinery, Lake Zurich, Ill., has added new medium-to-large sizes to its AD Advantage Series all-electric molding machines.
New Product Announcements Published: 4/1/2010

Clean-Room Electric Machine

Models designed specifically for clean rooms have been added to the Canbel all-electric series from Negri Bossi, Inc., New Castle, Del.
New Product Announcements Published: 4/1/2010

High-Tear-Strength LSR for Easier Demolding

WEB EXCLUSIVE: New KEG-2005 series liquid silicone rubber from Shin-Etsu Silicones of America, Inc.,Akron, Ohio, has enhanced tear strength to allow demolding thin-wall parts without damage and to provide better toughness in use.
New Product Announcements Published: 4/1/2010

Fast Hot-Runner Controller

A new hot-runner temperature controller for 2 to 128 zones boasts very fast scanning and fuzzy logic for accuracy to 0.1° C without overshooting.
New Product Announcements Published: 3/1/2010

New Nozzles for Hot Runners and LSR Cold Runners

D-M-E Co., Madison Heights, Mich., has expanded its Polimax series of hot-runner nozzles to cover lengths from 50 to 500 mm, a multitude of tip designs, and shot weights up to 3000 g.
New Product Announcements Published: 3/1/2010