New Blown Film Coolers

The BFC Series of blown-film coolers from Mokon, Buffalo, promises to boost film output, particularly in warmer climates or other regions where ambient air temperature rises during the summer.
New Product Announcements Published: 10/1/2009

Infrared Barrel Heating Now for Smaller Presses

Energy-saving TCS Infrared barrel-heating technology from the ServTek group of Milacron Inc., Batavia, Ohio, is now available for presses under 400 tons.
New Product Announcements Published: 10/1/2009

New Thin-Wall Approach And Other Tooling News at NPE

Lightweighting injection molded parts is the aim of a new Thin Recess Injection Molding (TRIM) process introduced at NPE last month by Stack Teck Systems Ltd., Brampton, Ont.
New Product Announcements Published: 7/1/2009

‘Green’ Portable Chillers Save Space and Energy

Smaller footprint, energy savings, and enhanced control (including a handheld pendant) are some of the new features of the first “green” chiller from ACS Group, New Berlin, Wis.
New Product Announcements Published: 6/1/2009

Conformal Mold Cooling Gains Another Licensee

A patented conformal cooling process developed by Ritemp Technologies Pty.
New Product Announcements Published: 5/1/2009

Integrated Multi-Loop Controller Saves Time, Space and Cost

Watlow, St.
New Product Announcements Published: 4/1/2009

Chillers Use New Eco-Friendly Refrigerants

Two chiller suppliers have come out with new models designed to handle alternative refrigerants to replace ozone-damaging R-22 (“Freon”), which has been the industry standard. “Soon, all chillers will need to use a non-ozone-deplet...
New Product Announcements Published: 3/1/2009

More Efficient Cooling Without Tower or Chiller

A process-cooling system introduced from Italy as a more efficient alternative to cooling towers or central chillers has undergone a redesign that further increases its cooling capacity.
New Product Announcements Published: 2/1/2009

Unique Mold Cooling Cuts Cycles, Raises Output

New aluminum mold blocks from ThermaForm LLC, Troy, Mich., incorporate conformal cooling technology to reduce cycle times for blow molded bottles.
New Product Announcements Published: 2/1/2009

SMC Preheater Cuts Cure Time

A new radio-frequency preheater for SMC sheet improves the distribution of reinforcements in molded parts and reduces cure time by 50%, especially in thicker bosses and structures.
New Product Announcements Published: 2/1/2009