Product Categories of Walton/Stout, Inc.

• Blenders (non-intensive)

  Proportional blenders for virgin, regrind, and color concentrates; and pneumatic conveying systems for pellets or powder. Also weighing equipment and batching control systems.

• Conveying Equipment (pneumatic and Mechanical)

  Pneumatic rail unload and machine-load conveying systems for powder or pellets, including vacuum pump packages, filter systems, vacuum-receiver level-control switches, RJ-5 powder filters, virgin/regrind receivers, and pellet receivers. Standard options include sound enclosure, stainless-steel construction, rates to 30,000 lb/hr, internal check valves, dual proportioning valves, and dual inlet valves. Also microprocessor-controlled weigh and volumetric blenders to 5000 lb/hr.

  Dense-phase pneumatic conveyors move products at low velocities and high quantities over long distances without product degradation, stringers, fines, heat build-up, or other types of problems incurred in dilute-type conveying.

  Construction engineering, turnkey services, and installation.

• Dryers for Resins

  Dehumidifying desiccant dryers with microprocessor controller feature dewpoints of -40 F; electronic temperature control; process-air filter with cyclone and cartridge; cycle rates of 8, 12, and 16/hr; no moving parts except two four-way valves and the blowers; hopper clean-out door and large sightglass; 20 through 4000 cfm size range with hopper capacities to 25,000 lb; direct-drive fans; location of desiccant inside towers and heaters outside in separate boxes; and drawer-type process-air heaters mounted externally.

  Microprocessor-based control panel, which controls and monitors all dryer functions, available with graphic presentation. Process-air temperature selected manually and maintained with solid-state electronic temperature control.

  Also hot-air dryers and preheater units for use with nonhygroscopic materials from 85 through 4000 cfm. Units have solid-state electronic temperature controls. Process heaters, mounted externally, are drawer-type that slide in and out. All units are compact, accessible from the exterior, and furnished with direct-drive fan.

• Dust Removal Equipment
• Feeders

  Proportional blenders for virgin, regrind, and color concentrates; and pneumatic conveying systems for pellets or powder. Also weighing equipment and batching control systems.

• Hopper Loaders

  Pneumatic rail unload and machine-load conveying systems for powder or pellets, including vacuum pump packages, filter systems, vacuum-receiver level-control switches, RJ-5 powder filters, virgin/regrind receivers, and pellet receivers. Standard options include sound enclosure, stainless-steel construction, rates to 30,000 lb/hr, internal check valves, dual proportioning valves, and dual inlet valves. Also microprocessor-controlled weigh and volumetric blenders to 5000 lb/hr.

  Dense-phase pneumatic conveyors move products at low velocities and high quantities over long distances without product degradation, stringers, fines, heat build-up, or other types of problems incurred in dilute-type conveying.

  Construction engineering, turnkey services, and installation.

• Hoppers, Bins, Tanks

  Pneumatic rail unload and machine-load conveying systems for powder or pellets, including vacuum pump packages, filter systems, vacuum-receiver level-control switches, RJ-5 powder filters, virgin/regrind receivers, and pellet receivers. Standard options include sound enclosure, stainless-steel construction, rates to 30,000 lb/hr, internal check valves, dual proportioning valves, and dual inlet valves. Also microprocessor-controlled weigh and volumetric blenders to 5000 lb/hr.

  Dense-phase pneumatic conveyors move products at low velocities and high quantities over long distances without product degradation, stringers, fines, heat build-up, or other types of problems incurred in dilute-type conveying.

  Construction engineering, turnkey services, and installation.

• Level Sensors and Controls
• Materials Testing Services
• Metering, Proportioning Equipment

  Proportional blenders for virgin, regrind, and color concentrates; and pneumatic conveying systems for pellets or powder. Also weighing equipment and batching control systems.

• Moisture Analyzers
• Pneumatic Components (including Compressors)
• Preheaters for Materials
• Silos

  Pneumatic rail unload and machine-load conveying systems for powder or pellets, including vacuum pump packages, filter systems, vacuum-receiver level-control switches, RJ-5 powder filters, virgin/regrind receivers, and pellet receivers. Standard options include sound enclosure, stainless-steel construction, rates to 30,000 lb/hr, internal check valves, dual proportioning valves, and dual inlet valves. Also microprocessor-controlled weigh and volumetric blenders to 5000 lb/hr.

  Dense-phase pneumatic conveyors move products at low velocities and high quantities over long distances without product degradation, stringers, fines, heat build-up, or other types of problems incurred in dilute-type conveying.

  Construction engineering, turnkey services, and installation.

• Vacuum Pumps
• Valves, Gates, Diverters
• Weigh Scales

  Pneumatic rail unload and machine-load conveying systems for powder or pellets, including vacuum pump packages, filter systems, vacuum-receiver level-control switches, RJ-5 powder filters, virgin/regrind receivers, and pellet receivers. Standard options include sound enclosure, stainless-steel construction, rates to 30,000 lb/hr, internal check valves, dual proportioning valves, and dual inlet valves. Also microprocessor-controlled weigh and volumetric blenders to 5000 lb/hr.

  Dense-phase pneumatic conveyors move products at low velocities and high quantities over long distances without product degradation, stringers, fines, heat build-up, or other types of problems incurred in dilute-type conveying.

  Construction engineering, turnkey services, and installation.