Moldpro Machinery & Systems Inc.

Contact Information

Please visit: Moldpro Machinery & Systems Inc.

Mailing Address:
4042 Mainway Dr.
Burlington, ON L7M 4B9 CA

Phone: 905-335-3364
Toll-Free: 800-330-1338
Fax: 905-335-1116

Product Categories of Moldpro Machinery & Systems Inc.

Extrusion Blow Molding Machines

Machine type: Continuous-extrusion, stationary or shuttle clamp

Models: Plus AT Series

Typical bottle volume: 20 cc to 20 L

No. of cavities: 1 to 12

Clamp-force range: 2.2 to 100 tons

Features: Single or dual station; smaller units have fixed clamps, larger have shuttles; takeout and deflashing standard.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: All-electric continuous-extrusion

Model: Apex 300

Typical bottle volume: 150 cc to 1.5 L

No. of cavities: up to 5

Features: Horizontal stroke and bobbing extruder.

Machine type: Accumulator head

Models: SE, AE Series

Accumulator size: 4.4 to 26.4 lb

Clamp-force range: 22 to 55 tons

Extruder capacity: 185 to 750 lb/hr

Features: Automatic deflashing, can run in continuous-extrusion mode.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: Integrated injection stretch-blow

Models: NSB Series

Typical bottle size: 20 cc to 5 L

Max. container neck diam.: 15 to 70 mm

No. of cavities: 2 to 14

Preform clamp tonnage: 55 to 110 tons

Blowing clamp tonnage: 33 to 44 tons

Applications: PET or Barex (acrylonitrile) bottles, jars

Features: 1.5-step Model NSB 100 E is all-electric, four-station rotary design, oriented bottle discharge, quick changeovers. New 140-ton clamp force, electric unit for wide-mouth PET containers has up to 14 cavities and runs a dry cycle time of 3 sec.

Machine type: Injection-blow

Models: I&B Hybrid Series

Applications: Narrow-neck PET bottles for cosmetics/pharmaceuticals

Features: Two three-station models and one four-station unit. Main movements are servo-driven and a unique fourth (conditioning) station provides water cooling before ejection.
Injection Blow Molding Machines

Machine type: Continuous-extrusion, stationary or shuttle clamp

Models: Plus AT Series

Typical bottle volume: 20 cc to 20 L

No. of cavities: 1 to 12

Clamp-force range: 2.2 to 100 tons

Features: Single or dual station; smaller units have fixed clamps, larger have shuttles; takeout and deflashing standard.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: All-electric continuous-extrusion

Model: Apex 300

Typical bottle volume: 150 cc to 1.5 L

No. of cavities: up to 5

Features: Horizontal stroke and bobbing extruder.

Machine type: Accumulator head

Models: SE, AE Series

Accumulator size: 4.4 to 26.4 lb

Clamp-force range: 22 to 55 tons

Extruder capacity: 185 to 750 lb/hr

Features: Automatic deflashing, can run in continuous-extrusion mode.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: Integrated injection stretch-blow

Models: NSB Series

Typical bottle size: 20 cc to 5 L

Max. container neck diam.: 15 to 70 mm

No. of cavities: 2 to 14

Preform clamp tonnage: 55 to 110 tons

Blowing clamp tonnage: 33 to 44 tons

Applications: PET or Barex (acrylonitrile) bottles, jars

Features: 1.5-step Model NSB 100 E is all-electric, four-station rotary design, oriented bottle discharge, quick changeovers. New 140-ton clamp force, electric unit for wide-mouth PET containers has up to 14 cavities and runs a dry cycle time of 3 sec.

Machine type: Injection-blow

Models: I&B Hybrid Series

Applications: Narrow-neck PET bottles for cosmetics/pharmaceuticals

Features: Two three-station models and one four-station unit. Main movements are servo-driven and a unique fourth (conditioning) station provides water cooling before ejection.
Stretch-Blow Molding Machines

Machine type: Continuous-extrusion, stationary or shuttle clamp

Models: Plus AT Series

Typical bottle volume: 20 cc to 20 L

No. of cavities: 1 to 12

Clamp-force range: 2.2 to 100 tons

Features: Single or dual station; smaller units have fixed clamps, larger have shuttles; takeout and deflashing standard.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: All-electric continuous-extrusion

Model: Apex 300

Typical bottle volume: 150 cc to 1.5 L

No. of cavities: up to 5

Features: Horizontal stroke and bobbing extruder.

Machine type: Accumulator head

Models: SE, AE Series

Accumulator size: 4.4 to 26.4 lb

Clamp-force range: 22 to 55 tons

Extruder capacity: 185 to 750 lb/hr

Features: Automatic deflashing, can run in continuous-extrusion mode.

Options: Coextrusion up to 7 layers, window stripe.

Machine type: Integrated injection stretch-blow

Models: NSB Series

Typical bottle size: 20 cc to 5 L

Max. container neck diam.: 15 to 70 mm

No. of cavities: 2 to 14

Preform clamp tonnage: 55 to 110 tons

Blowing clamp tonnage: 33 to 44 tons

Applications: PET or Barex (acrylonitrile) bottles, jars

Features: 1.5-step Model NSB 100 E is all-electric, four-station rotary design, oriented bottle discharge, quick changeovers. New 140-ton clamp force, electric unit for wide-mouth PET containers has up to 14 cavities and runs a dry cycle time of 3 sec.

Machine type: Injection-blow

Models: I&B Hybrid Series

Applications: Narrow-neck PET bottles for cosmetics/pharmaceuticals

Features: Two three-station models and one four-station unit. Main movements are servo-driven and a unique fourth (conditioning) station provides water cooling before ejection.

As seen in PT

K 2010 Preview, Blow Molding New Machines Promise More Output with Less ‘Juice’
Higher throughputs and greater energy efficiency will be two big themes in blow molding at next month’s K 2010 show.
What to See at NPE 2006: Blow Molding
Show-goers will see a range of new blow molding equipment that offers higher speeds, more cavitation, and faster changeovers.
NPE News Preview: Blow Molding--Higher Speeds, More Cavities, Faster Changeovers
Improving productivity while minimizing capital cost and floorspace will be central themes of blow molding exhibits at NPE 2006.
K 2004 Wrap-Up on Blow Molding: Outputs Keep Rising For PET, OPP, HDPE
Among the more unusual blow molding developments at K 2004 was a closed-loop control system that monitors and corrects material distribution in PET containers as they are produced.