CDS - Custom Downstream Systems Inc.

Contact Information

Please visit: CDS - Custom Downstream Systems Inc.

Mailing Address:
1930 52nd Ave.
Lachine, QC H8T 2Y3 CA

Phone: 514-633-5933
Toll-Free: 877-633-1993
Fax: 514-633-5944

Product Categories of CDS - Custom Downstream Systems Inc.

  • Custom Machine Builders
  • Cutoff Equipment
  • Embossing Equipment
  • Extrusion Dies
  • Machine Maintenance Services
  • Machinery Rebuilding
  • Pipe Take-off Systems more (+)
  • Profiles, Tubing, Hose Take-off Systems more (+)
  • Saws

As seen in PT

  • EXTRUSION: Self-Adjusting Pullers

    Unit opens on its own to accommodate pipe/profile size.

  • On Site: Growth Through Innovation in Medical Tubing

    By focusing on high-tech, quick-turnaround, turnkey solutions, Putnam Plastics has grown into a leader in the field of medical extrusion.

  • Downstream Tubing Line for Medical Applications

    A new compact cooling tank and puller/cutter combination engineered specifically for tight-tolerance medical tubing was displayed at the NPE show in Chicago by CDS Inc., Lachine, Que.

  • Planetary Cutter

    CDS is proud to introduce the CFPC series Planetary Cutter to its family of cut-to-length products.

  • New Angle on Cutting

    A recently developed in-line table saw cuts at preset 45° to 135° angles with accuracy of ±0.020 in., says the supplier, CDS Custom Downstream Systems Inc., Lachine, Que.

  • Dual Downstream Extrusion lines

    CDS's dual downstream extrusion lines enable high-output extruders to maximize the processing efficiency of their applications while still meeting the quality and delivery demands of their customers.

  • Rod & sheet extrusion line

    CDS offers a line of machinery for processing heavy, dense industrial polymer applications such as rods and thick sheet.

  • ARC: Inline multi-angle V-notch saw

    Whereas the traditional method for rendering angled edges on post-extruded profiles is to use a miter saw offline, CDS's ARC (Angled Repositioning Cuts) saw is used inline to create the same result.

  • Downstream automotive extrusion line

    CDS's SealStream post-extruder line is designed to process automotive components, such as seals and weatherstripping.

  • Calibration Tank Controls More Temperature Zones

    Custom cooling tanks have been built with two or even three different temperature-control zones in the water bath.

  • NPE Newsfinder: Extrusion

    NPE will show higher outputs of practically everything, as advances in grooved feeds, servo drives, screw torque, mixing screws, dies, and downstream cooling, cutting, and handling make everything run faster.

All rights reserved. Copyright © Gardner Business Media, Inc. 2016 Cincinnati, Ohio 45244