Fortune International Inc., Injection Molding Div.

Contact Information

Please visit: Fortune International Inc., Injection Molding Div.

Mailing Address:
56 Veronica Ave.
Somerset, NJ 08873 US

Phone: 732-214-0700
Toll-Free: 888-306-9470
Fax: 732-214-0701

A Special Message from Fortune International Inc., Injection Molding Div.

High Quality, Value Driven Injection Molding Machines from 50-1600 tons

VR-1300 tons

VR-1300 tons

Fortune International, Inc. is the exclusive importer of Victor Taichung Injection Molding Machines, who are recognized throughout the world for their high quality, value driven machinery. The company has been selling, servicing and supporting these machines in the U.S. for more than 20 years. Fortune offers injection molding machines in the range of 50-1600 U.S. tons and backs the quality up with a 3-Year Limited Warranty, 1-Year Service free of charge and installation & training at the customers facility.


Integrated Plastics Machinery, Inc., Open House

Fortune's California office, Integrated Plastics Machinery, Inc., open House on March 12, 2014 at:

196 Lewis Court
Corona, CA 92882
PH: 951-272-8774

This one-day Open House at our new 6,000 sq. ft. facility. We will be showing a Fortune/ Victor Taichung VS-50K injection molding machine with Yushin robotic.  Our new facility houses sales, service, inventory and a technology center with multiple molding cells designed for mold trials and equipment evaluation. Representatives from our vendor partners will be on hand to discuss your processing requirements and answer any questions you may have.


 

Product Categories of Fortune International Inc., Injection Molding Div.

  • Injection Molding Machines
  • Machining, Drilling, Routing Equipment
  • Mold Making and Repair Equipment
  • Saws

Trade Names of Fortune International Inc., Injection Molding Div.

  • Fortune
  • Royal
  • Victor Taichung

As seen in PT

  • TOOLING: Mold Simulation Software Gains Speed & New Functionality

    Enhancements in simulating conformal cooling, hot runners, MuCell foaming, shrink/warp, and fiber reinforcements.

  • INJECTION MOLDING/BLOW MOLDING/EXTRUSION: Plastics Spotlight Shines on Taiwan This September

    Eight Taiwanese machinery suppliers preview their exhibits at the upcoming national show.

  • Injection Molding at K 2013: Doing More with Less

    More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 show.

  • Fortune International Inc., marketing the plastic injection machinery from Victor Taichung Machine Works, of Taichung Taiwan will have their new logo and trademark for World Wide continuity and recognition.

  • Victor Taichung Vs ES-Series injection molding machine has been developed by fusing of merits of hydraulic injection machines (low maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise) The innovative new pump system, "Piston-Pump," achieves energy-saving operation and quick response equivalent to all electric molding machines  Energy saving --- Almost equivalent to all electric molding machines.  Quick response --- Injection response time (Standard mode)  Stability in low-velocity/low-pressure & wide range --- Injection velocity: From ultra-low to high velocity range  Linearity --- Excellent linearity in both injection velocity and injection pressure  Excellent injection holding pressure performance --- Capability in sustaining high injection holding pressure longer (as compared with all electric types)  Reduction in the amount of hydraulic oil  Silent! (Low noise) Almost equivalent to all electric molding machine.

  • NPE News in Injection Molding

    If a better machine can help your company beat challenging economic conditions, you’ll probably find it at NPE. And finding it will be easier, thanks to our editors’ efforts to sift out of some 2000 exhibits the most significant news in injection and blow molding, extrusion, compounding, and thermoforming.

  • What's New at the Show in INJECTION MOLDING

    At the big “K” Show next month, top billing goes to new all-electric machines aimed at every segment of the market, from general-purpose to high-end.

  • Electric, Hydraulic, or Hybrid? What's the Right Injection Press for You?

    If you were buying an injection molding machine 20 years ago, you had to decide between a toggle or fully hydraulic clamp and that was pretty much it.

  • What to See at NPE 2006: Injection Molding

    Energy-saving all-electric machines will continue to be a big draw at NPE, where new designs or upgraded models will be found in virtually every press maker’s booth.

  • K 2004 News Preview: Injection Molding

    The diversity of electric machines will be on display at this year’s show, with several new all-electric versions in direct-drive and belt-driven versions.

  • NPE 2000 News Wrap-Up: Injection Molding

    These two show-goers found what they needed at NPE.

  • Injection Molding (K 2001 Preview)

    All-electric machines will be one of the biggest themes in injection molding machinery at this year’s K show, where at least nine firms will bring out their first models.

Copyright © Gardner Business Media, Inc. 2014 All rights reserved.