Geiger Handling USA, Inc.

Product Categories of Geiger Handling USA, Inc.

• Assembly Robots and EOAT

  Beam-mounted three-axis robot models are pneumatic or servo-driven for degating, insert molding, inspection, part/sprue picking, and in-mold labeling.

  Pneumatic PP 0.3 sprue picker for presses of 150-200 tons is PLC-controlled, handles weights up to 0.66 lb, and operates at about 4-sec cycle time.

  PP 1.0 air-driven model for part removal handles weights to 2.2 lb and is used on presses up to 300 tons.

  SP 1.5 model for presses up to 300 tons takes part and gripper weights totaling 3.3 lb and uses brushless d-c servo motors for each axis and a freely programmable controller.

  LR 16 servo-driven model for complex handling and automation applications on machines up to 500 tons. Handles weight to 13.2 lb and operates on a cycle time of about 5 sec. 

  ML 60 is a high-speed servo handler for complex automation of machines to 700 tons. Handles up to 33 lb. CNC controller makes operation accurate to 0.1 mm.

• Assembly Systems
• Conveyors (parts-handling)
• General Purpose Robots and EOAT

  Beam-mounted three-axis robot models are pneumatic or servo-driven for degating, insert molding, inspection, part/sprue picking, and in-mold labeling.

  Pneumatic PP 0.3 sprue picker for presses of 150-200 tons is PLC-controlled, handles weights up to 0.66 lb, and operates at about 4-sec cycle time.

  PP 1.0 air-driven model for part removal handles weights to 2.2 lb and is used on presses up to 300 tons.

  SP 1.5 model for presses up to 300 tons takes part and gripper weights totaling 3.3 lb and uses brushless d-c servo motors for each axis and a freely programmable controller.

  LR 16 servo-driven model for complex handling and automation applications on machines up to 500 tons. Handles weight to 13.2 lb and operates on a cycle time of about 5 sec. 

  ML 60 is a high-speed servo handler for complex automation of machines to 700 tons. Handles up to 33 lb. CNC controller makes operation accurate to 0.1 mm.

• Labeling Equipment--In-Mold
• Part or Sprue Removal Robots and EOAT

  Beam-mounted three-axis robot models are pneumatic or servo-driven for degating, insert molding, inspection, part/sprue picking, and in-mold labeling.

  Pneumatic PP 0.3 sprue picker for presses of 150-200 tons is PLC-controlled, handles weights up to 0.66 lb, and operates at about 4-sec cycle time.

  PP 1.0 air-driven model for part removal handles weights to 2.2 lb and is used on presses up to 300 tons.

  SP 1.5 model for presses up to 300 tons takes part and gripper weights totaling 3.3 lb and uses brushless d-c servo motors for each axis and a freely programmable controller.

  LR 16 servo-driven model for complex handling and automation applications on machines up to 500 tons. Handles weight to 13.2 lb and operates on a cycle time of about 5 sec. 

  ML 60 is a high-speed servo handler for complex automation of machines to 700 tons. Handles up to 33 lb. CNC controller makes operation accurate to 0.1 mm.

• Spray Painting Robots and EOAT

  Beam-mounted three-axis robot models are pneumatic or servo-driven for degating, insert molding, inspection, part/sprue picking, and in-mold labeling.

  Pneumatic PP 0.3 sprue picker for presses of 150-200 tons is PLC-controlled, handles weights up to 0.66 lb, and operates at about 4-sec cycle time.

  PP 1.0 air-driven model for part removal handles weights to 2.2 lb and is used on presses up to 300 tons.

  SP 1.5 model for presses up to 300 tons takes part and gripper weights totaling 3.3 lb and uses brushless d-c servo motors for each axis and a freely programmable controller.

  LR 16 servo-driven model for complex handling and automation applications on machines up to 500 tons. Handles weight to 13.2 lb and operates on a cycle time of about 5 sec. 

  ML 60 is a high-speed servo handler for complex automation of machines to 700 tons. Handles up to 33 lb. CNC controller makes operation accurate to 0.1 mm.

• Stacking, Packing Equipment
• Unscramblers, Orienting Devices