Product Categories of Graco Inc.

• Adhesive Bonding Equipment
• Adhesives for Plastics
• Continuous Casting/Polymer Concrete Machines

  Plural-component equipment systems for metering, mixing, spraying or casting PUR, epoxy, polysulfide or filled polyester. Pumping units with mix ratios from 1:1 to 18:1 draw materials from catalyst and resin storage tanks, and deliver components to a static-mixing head where a transfer hose can be used to deliver mix to spray guns or dispensing valves.

• Conveying Equipment (pneumatic and Mechanical)
• Dispensing Equipment for Reactive Resin Systems
• Electrostatic Spray Equipment

  Manual and automatic painting systems for conventional, HVLP, electrostatic, air, air-assisted airless, and airless spray. Pumping equipment for single- and plural-component coatings, sealants, and adhesives provides up to 63 gpm and pressures to 4950 psi. In-mold coating systems for SMC. Urethane coating is pumped into mold after part is formed.

• Encapsulating Equipment
• Hydraulic Components and Systems
• In-mold Coating Equipment

  Manual and automatic painting systems for conventional, HVLP, electrostatic, air, air-assisted airless, and airless spray. Pumping equipment for single- and plural-component coatings, sealants, and adhesives provides up to 63 gpm and pressures to 4950 psi. In-mold coating systems for SMC. Urethane coating is pumped into mold after part is formed.

• Metering, Proportioning Equipment

  Fluid-transfer and supply pumps (air- and hydraulic-powered), plural component proportioning systems, and complete circulating systems.

• Other Paint Spray Equipment

  Manual and automatic painting systems for conventional, HVLP, electrostatic, air, air-assisted airless, and airless spray. Pumping equipment for single- and plural-component coatings, sealants, and adhesives provides up to 63 gpm and pressures to 4950 psi. In-mold coating systems for SMC. Urethane coating is pumped into mold after part is formed.

• Pumps - Liquid Additive
• Pumps - Liquid Resin
• Spray-up Systems

  Plural-component equipment systems for metering, mixing, spraying or casting PUR, epoxy, polysulfide or filled polyester. Pumping units with mix ratios from 1:1 to 18:1 draw materials from catalyst and resin storage tanks, and deliver components to a static-mixing head where a transfer hose can be used to deliver mix to spray guns or dispensing valves.

• Urethane Frothing Equipment

  Foam spray systems with outputs to 30 lb/min incorporate Foam Cat proportioning pump, heaters, heated hose to 208 ft, and low-maintenance spray gun with mechanical or solvent purge. Selection of feed pumps for handling raw materials directly from original containers.

• Urethane Pouring and Casting Equipment (Metering Systems Only)

  Foam spray systems with outputs to 30 lb/min incorporate Foam Cat proportioning pump, heaters, heated hose to 208 ft, and low-maintenance spray gun with mechanical or solvent purge. Selection of feed pumps for handling raw materials directly from original containers.

• Urethane Spray-up Equipment

  Foam spray systems with outputs to 30 lb/min incorporate Foam Cat proportioning pump, heaters, heated hose to 208 ft, and low-maintenance spray gun with mechanical or solvent purge. Selection of feed pumps for handling raw materials directly from original containers.