Contact Information

Please visit: Mokon

Mailing Address:
2150 Elmwood Ave.
Buffalo, NY 14207 US

Phone: 716-876-9951
Fax: 716-874-8048

Product Categories of Mokon

  • Chillers more (+)
  • Clean Rooms and Components
  • Closed-loop Process Control Systems
  • Cooling Towers more (+)
  • Custom Machine Builders
  • Heat Exchangers
  • Heat-recovery Systems
  • Heat-transfer Fluids
  • Hot-water or Oil-circulating Temperature Controllers more (+)
  • Mold-cleaning and Maintenance Chemicals
  • Preheaters for Materials
  • Temperature Controllers, Monitors
  • Water Treatment/Filtration Systems
  • Water, Oil Manifolds and Couplings

As seen in PT

  • Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations

    There will be an extraordinary range of new auxiliary equipment on display at the show.

  • EXTRUSION: Blown Film Air Coolers

    Mokon, Buffalo, N.Y., has expanded its BFC Series of blown film air coolers, which are now available from 600 to 9000 cfm.

  • Heating & Cooling at NPE 2003

    Smaller, more efficient, and environmentally friendly are the themes for new heating/cooling products at NPE.

  • Six Things You Should Know About New Eco-Friendly Chillers

    If you never paid much attention to what kind of refrigerant is circulating inside your plastics chillers, it may be time you did.

  • Process Cooling Goes for Performance Plus Affordability

    At the NPE 2009 show in Chicago, half a dozen exhibitors showed new cooling equipment that emphasized improved performance at about the same or lower cost.

  • New Blown Film Coolers

    The BFC Series of blown-film coolers from Mokon, Buffalo, promises to boost film output, particularly in warmer climates or other regions where ambient air temperature rises during the summer.

  • NPE 2009 News Flash

    Injection MoldingHybrid Press Has Electric ClampNew injection presses that combine servo-electric and hydraulic movements to achieve high performance with energy efficiency will be discussed by Arburg Inc., Newington, Conn.

  • Mokon announces the availability of power and process control panels and systems for commercial and industrial applications.

  • Larger Hot-Water and Oil Temperature Controllers

    Mokon, Buffalo, N.Y., has added larger models of hot-water and oil circulating temperature control units (TCUs). The Hydrotherm II water TCU, which has stainless steel as the main component for wetted surfaces, is now available with up to 12-kw heating capacity and pump sizes up to 3 hp and flow rates to 60 gpm.

  • Mokon's Blown Film Air Coolers offer an increase in blown film productivity, especially in warmer climates or other environments where ambient air temperatures rise during the summer.

  • Re-engineered to improve accuracy, reliablity of operation and increase output, the Hydrotherm has the highest quality components and construction materials in the industry.

  • Mokon announces the availability of the newly redesigned HF-2 Series Heat Transfer Fluid System, updated with improved performance, energy efficiency and reduced space requirements for large flow and higher heating capacity applications.

  • Use Ambient-Temperature Water Cooling in Winter

    When it’s cold outside, save water and energy by turning off your chiller.

  • Mokon's new C3 Cold Climate Cooler System offers a cost-effective solution to process cooling in cold weather areas.

  • Portable Chillers With Dual Circuits

    Mokon, Buffalo, N.Y., now offers its Iceman portable chillers in dual-circuit models from 10- to 40-ton capacity.

  • Iceman Full Range chiller/heater combinations are now available in a wider range of capacities up to 35 tons.

  • NPE 2006 News Wrap-Up: Fluid Temperature Control: Saving on Energy and Maintenance

    At NPE in Chicago, chillers and TCUs were put on a lean energy diet and redesigned for greater durability. Suppliers also added features while taking out cost.

  • What to See at NPE 2006: Heating and Cooling

    Most of the news at the show is in fluid-circulating mold-temperature-control systems.

  • NPE 2006 News Flash

    Injection MoldingSimplified Hot Runners Save Time & CostA new lower-cost hot-runner alternative to valve gating is suited to less critical cosmetic applications where users need predictable and reliable gate opening but not sequential gate operation.

  • NPE Newsfinder: Heating and Cooling

    Band-heater developments at the show are focused on high-temperature applications such as “thixomolding” and on prolonging heater life by minimizing leaks.

All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244