Moretto S.p.A.

Contact Information

Please visit: Moretto S.p.A.

Mailing Address:
Via Dell'Artigianato No. 3
Massanzago (Padova), 35010 IT

Phone: 39-049-9396711
Fax: 39-049-9396710

Product Categories of Moretto S.p.A.

  • Blenders (non-intensive)
  • Chillers
  • Feeders
  • Granulators
  • Hopper Loaders
  • Hoppers, Bins, Tanks
  • Hot-water or Oil-circulating Temperature Controllers
  • Mold Dehumidification Systems
  • Preheaters for Materials

As seen in PT

  • Raise the Bar on Drying: Savvy Processors Reveal Best Practices

    The processors speak: Here’s how some smart molders and extruders tackle the vexing problem of resin drying.

  • Auxiliaries at K 2013: More Efficient, Flexible & User-Friendly

    It’s hard to generalize about auxiliary equipment, but a few trends stood out at K, including: greater energy efficiency, ease of maintenance and cleaning, controls that provide more real-time and historical process information and greater ease of use.

  • HEATING/COOLING: Portable Chillers & TCUs at K 2013

    New chilllers and TCUs from Conair, Moretto, and Wittmann.

  • MATERIALS HANDLING: Self-Adjusting Vacuum Conveying Control

    At K 2013 in Dusseldorf next month, Moretto S.p.A. of Italy will present a new central vacuum conveying control that makes it unnecessary to make settings for times, line cleaning, and other parameters when an additional processing machine is connected to the system.

  • Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations

    There will be an extraordinary range of new auxiliary equipment on display at the show.

  • K 2010 Preview, Auxiliaries: Equipment of All Types Debuts This Month at K 2010

    From materials drying, feeding, and blending to process heating/cooling, scrap reclaiming, testing, welding, and decorating—the K 2010 show this month in Dusseldorf, Germany, will have news in all categories of auxiliary equipment.

  • New Approach to PET Drying To Debut This Fall at K 2010 Show

    An Italian maker of auxiliary equipment has come up with a new system that combines several unusual concepts to make high-volume PET drying faster and more consistent with lower energy use.

  • Materials Handling: New Equipment Emphasizes Efficiency & Value

    Visitors to the recent NPE 2009 show in Chicago were looking for materials handling equipment that could do more than dry, blend, or convey resins. It had to do those things while saving energy, providing faster and easier maintenance, speeding product changeovers, reducing labor cost, minimizing waste, and providing better value for money. The new products cited below addressed those needs and more.

  • X PET-PRO is an innovative system realized for the treatment of highly hygroscopic technical polymers.

  • DPM works in the opposite way in comparison to the traditional dosing units: first it calculates the quantity of masterbatch to dose through the Rotopulse system, and then it doses the other components.

  • Dry Air is a double tower dehumidifier for small productions, suitable for technical products of small size: lens for microcameras, pieces for telephony, etc.

  • X Dryer is a dehumidifying system that guarantees superior flexibility.

  • The new XD 600 series is another exclusive of the project that boasts 3 models with an airflow from 250 to 2.500 m3/h.

  • DGM GRAVIX is a gravimetric dosing unit able to treat up to 12 components, with 8 double-lid hoppers and 4 volumetric dosing units.

All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244