Paratherm

2009 Renaissance Blvd.
King of Prussia, PA 19406 US

Connect

A Message from Paratherm

Company Profile

Paratherm Corporations Immersion Engineering?

Three Paratherm Heat Transfer Fluids for Injection Molding & More

Fast Cold Startup, Fouling Resistance for Hot Oil UnitsThe Paratherm NF® Heat Transfer Fluid is a food grade, mineral-oil based heat transfer fluid designed for extended trouble-free service in closed-loop liquid-phase systems up to 600°F in fuel-fired heaters and 630°F in electric immersion heaters.

Paratherm MR® Heat/Cool Heat Transfer Fluid

Single fluid heating and cooling from 36°F to 550°F Non-aromatic/low odor composition reduces worker exposure and environmental issues Extends low-temperature capabilities of standard hot oil temperature control units The Paratherm MR® mid-range heat transfer fluid is rated for service from 36°F to 550°F.

Sludge Resistant for Oxidation-Prone Aps

 Designed for extruders, temperature control units, and especially applications where hot fluid is exposed to air.

As Seen In Plastics Technology

Paratherm Moves to New Headquarters
Less than 2 miles from the former location, with more lab and conference space.

Water-treatment system

Heating & Cooling at NPE 2003
Smaller, more efficient, and environmentally friendly are the themes for new heating/cooling products at NPE.

Fluid Cleans Hot-Oil Systems 'On The Fly'
The new AC System Cleaner Liquid from Paratherm Corp., West Conshohocken, Pa., is recommended for cleaning large systems using aromatic/synthetic-based heat-transfer fluids.

Brand-new oil

Easy Cures for Common Complaints About Hot-Oil Units
Molders of high-temperature materials frequently ask these six questions about hot-oil temperature-control units (TCUs):Is smoke dangerous?Why is the pump discharge pressure bouncing all over?Why has the oil degraded and is it damaging the pump seals?Why can’t I get the mold hot enough without running the temperature above the flashpoint?Does it mean I’m running the oil too hot if I am getting carbon on the Y-strainer?If the oil has turned color, should it be replaced?There are straightforward answers and solutions to all of the above.

Embedded web server

NPE News Wrap-up - Water & Oil Temperature Control
If you’re the sort of manager that can’t resist checking up on your plant after you go home for the night, now you can click on your web browser and read out mold temperatures right there on your PC.

Product Categories of Paratherm

Cleaning Systems for Hardware
Heat-transfer Fluids