Product Categories of Precision AirConvey Corp.

• Conveying Equipment (pneumatic and Mechanical)
• Granulators

  Three models of compact in-line granulator systems for pneumatic trim handling suitable for any film or sheet application. All units available with replaceable screen from 0.125- to 1-in. diam. holes, two to six rotor configurations, cutting clearances less than 0.0002 in., a "shaftless" cutting chamber, open rotor for minimum pressure drop, sealed bearings for long life, flange-mounted motor, and quiet scissor-action knives. Models include 78-GP series (4 x 7 in. inlet), 9832 series (9 x 5.5 in. inlet), and 811-GP series (8 x 11 in. inlet).

  Rollmaster series roll guillotines safely cut rolls of film or sheet from hollow cores. During cutting process, a hydraulically powered knife cuts the roll along its longitudinal center line to the top of the core and drops the cut material into a scrap bin or conveyor. The completely interlocked and safety guarded unit reduces labor to strip rolls. Cores can be reused, core paper contamination is eliminated, and multiple rolls of varying diam. can be cut.

• Scrap-reclaim Systems

  Offers an in-line repelletizing system that takes trim through a dual-diameter extruder, a small, air-cooled repelletizer built by PAC, and conveys pellets back to the extruder.

  Represents Plasmac repelletizing extruders from the U.K.

• Shredders, Guillotines

  Three models of compact in-line granulator systems for pneumatic trim handling suitable for any film or sheet application. All units available with replaceable screen from 0.125- to 1-in. diam. holes, two to six rotor configurations, cutting clearances less than 0.0002 in., a "shaftless" cutting chamber, open rotor for minimum pressure drop, sealed bearings for long life, flange-mounted motor, and quiet scissor-action knives. Models include 78-GP series (4 x 7 in. inlet), 9832 series (9 x 5.5 in. inlet), and 811-GP series (8 x 11 in. inlet).

  Rollmaster series roll guillotines safely cut rolls of film or sheet from hollow cores. During cutting process, a hydraulically powered knife cuts the roll along its longitudinal center line to the top of the core and drops the cut material into a scrap bin or conveyor. The completely interlocked and safety guarded unit reduces labor to strip rolls. Cores can be reused, core paper contamination is eliminated, and multiple rolls of varying diam. can be cut.

• Static-eliminating Equipment