Radici Plastics USA Inc.

960 Seville Rd.
Wadsworth, OH 44281 US

Division
Engineering Plastics

Connect

As Seen In Plastics Technology

New Resins & Additives Galore at K 2016
A wide range of interesting developments in materials technologies were sprinkled in with some intriguing announcements of new ventures at K 2016.

RadiciGroup “Snags” Stadium Seats at Rio 2016 Olympics
Radiflam nylon 6 once again to play role in Brazil’s stadium seating.

RadiciGroup Now Nylon Producer in Mexico
With new acquisition, RadiciGroup Plastics makes entry into Mexico and Central America.

Materials at NPE: New Solutions to Enhance Processing, Performance, Sustainability & Cost
There was no shortage of new thermoplastics and additives covering the full range of end-use applications.

MATERIALS: Novel Nylons to Debut at K Show
New and innovative nylons will be launched at K 2013 in Düsseldorf this month by both the Radici Group of Italy (U.S. office in Wadsworth, Ohio) and TeknorApex Co., Pawtucket, R.I.

MATERIALS AT NPE: All Market Sectors Benefit from Large Crop of New Materials
Higher-performance and easier processing PE film resins for packaging, a one-pass crosslinked PE for photovoltaic (PV) wire and cable, several higher-performing nylons and TPEs, “greener” plastics, and enhanced styrenic and PC resins are among the new materials that made their debut at the big show in Orlando, Fla., last month.

MATERIALS: High-Flow Structural Nylon Compounds
WEB EXCLUSIVE: RadiciGroup Plastics in Italy (U.S. office in Wadsworth, Ohio) has come up with high-flow nylon 6 compounds containing 50% and 60% glass fibers.

‘Easy-Molding’ Nylon Compound Targets Metal in Cars
Metal-replacement opportunities continue to emerge as fuel economies become more critical.

Four Key Markets Drive Material Advances At K 2010
Last fall’s K 2010 fair in Germany drew dozens of materials suppliers to show off hundreds of new products, aimed especially at packaging,medical, automotive, and electrical/electronics.

BASF's new Ultradur High Speed

K 2004 Wrap-Up on Materials: Setting New Benchmarks for Processability and Performance
 Higher flow, higher heat, higher barrier, higher clarity, higher stiffness, lower durometer, lower smoke, lower odor—materials exhibits at the recent K 2004 show in Dusseldorf were stretching the bounds of processing and performance properties in all directions.

Product Categories of Radici Plastics USA Inc.

ABS
Acetal
Nylon--Type 6
Nylon--Type 6/66 Copolymer
Nylon--Type 612
Nylon--Type 66
Polycarbonate
Polycarbonate/ABS Alloys
Polycarbonate/Polyester Alloy
Polyester (Thermoplastic)--PBT Type
Polyester (Thermoplastic)--PET Type
Polyester (Thermoplastic)--PETG Type
Thermoplastic Elastomers--Polyester Type
Thermoplastic Elastomers--Styrenic Type

Trade Names

HERAFLEX®
HERAFORM®
HERAMID® A, HERAMID® S
RADIBLEND®
RADIFLAM®
RADILENE®
RADILON® A, RADILON® S
RADILUX®
RADITER®