Product Categories of Sealant Equipment & Engineering, Inc.

• Adhesive Bonding Equipment
• Dispensing Equipment for Reactive Resin Systems
• Encapsulating Equipment
• Injection Molding Non-return Valves
• Injection Molding Nozzles
• In-mold Coating Equipment
• Liquid Mixers

  Dynamic and motionless-mixer systems blend plural-component epoxy, silicone, urethane, and polysulfide-type materials while dispensing. Disposable mix chambers available for use where cleaning solvents are prohibited.

• Metering, Proportioning Equipment
• Motionless Mixers

  Dynamic and motionless-mixer systems blend plural-component epoxy, silicone, urethane, and polysulfide-type materials while dispensing. Disposable mix chambers available for use where cleaning solvents are prohibited.

• Plastisol Processing Equipment
• Pumps - Liquid Resin
• Resin Transfer Molding (RTM) Equipment

  Low- to high-volume meter/mix/dispense equipment for epoxy, PUR, silicone, or polyester. From economical, air-powered bench-top unit to Program-A-Bead III units that interface with robots. RTM is a major application.

• Urethane Pouring and Casting Equipment (Metering Systems Only)

  Variable- and fixed-ratio meter/mix/dispense equipment with volumetric or timed shots, or operator-controlled volume and flow rates to 20 lb/min. Can be supplied with heated pressure tanks and gravity, pump or positive-displacement feed. Used with adhesives, sealants, and other reactive resin systems from water-thin to high-viscosity. Also systems for mixing three material components for water-based coatings.

• Valves, Gates, Diverters