Vecoplan, LLC
Contact Information
Please visit: Vecoplan, LLC
Mailing Address:
5708 Uwharrie Rd.
Archdale,
NC
27263
US
Phone:
336-861-6070
Toll-Free:
877-738-3241
Fax:
336-861-4329
A Special Message from Vecoplan, LLC
Vecoplan - The Ultimate Shredding Machine
|
Vecoplan's Film-Fiber Rotor Design A revolutionary design which eliminates the typical difficulties usually associated with the processing of plastic film and synthetic fiber materials. |
|
|
|
|
The HiTorc™ drive applies the highest possible torque over a wide speed range. This allows high torque at high RPM, thus limiting the current draw. Because high torque is achieved at higher speeds, shredder performance is greatly enhanced. |
|
|
|
|
VECOPLAN offers their latest innovation in size reduction technology; a line of horizontally-fed granulators and shredders for lineal scrap such as profile extrusions, small diameter pipe and PVC siding. |
Company Profile
Vecoplan, the inventor of the single-shaft rotary grinder / shredder, offers a vast array of wood grinders, chippers, plastic grinders, and granulators. Our paper shredding and recycling equipment is designed to handle your bulk material needs with high efficiency. In addition to our mobile and plant based document destruction solutions, and waste recycling systems, we offer full turn-key system design and installation. Vecoplan is the world's leading ISO 9001-certified manufacturer of advanced, industrial shredders and associated systems technology. For over 35 years, Vecoplan has provided customers with innovative shredding, conveying and separation technologies to meet their processing and recycling needs.
Product Categories of Vecoplan, LLC
- Conveying Equipment (pneumatic and Mechanical)
- Granulators
- Metal Detectors, Separators
- Shredders, Guillotines
As seen in PT
-
Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations
There will be an extraordinary range of new auxiliary equipment on display at the show.
-
More Choices for Grinding, Shredding
Many granulators on display at the K 2007 show in Dusseldorf last October were big models—150 to 200 hp—to enable higher throughputs or reclaiming larger parts and chunks. For example, Rapid Granulator from Sweden brought out the 600 model, the largest in its “open-hearted” series, which allow fast access to all internal components. It has a 600-mm-diam. rotor, 100 mm more than the next largest size.
-
Shredder Tackles Tough Films
A new single-shaft shredder is designed for high-output size reduction of films.
-
ARCHDALE, NC/March 15, 2007—Vecoplan, LLC, a leading manufacturer of industrial shredders and shredding systems used in many industries, today announced it new control panel system simply referred to as the Revision 9A with Human-Machine Interface. “The Rev. 9A is major advancement in shredder controls technology,” states Todd Carswell, Vecoplan’s VP of Technical development. “It was a collaborative effort between Marc Parsons, Vecoplan’s Graphics Director, Allen-Bradley, div. of Rockwell Automation, the large industrial controls manufacturer, and myself,” adds Carswell. “The major advantage on the Rev 9A is the customizable program setting that allows you to adjust program settings to your specific application” adds Mr.
-
NPE 2006 News Wrap-Up: Recycling and Scrap Reclaim
NPE was full of new equipment and systems for recapturing valuable in-plant scrap and post-consumer/post-industrial plastic waste. Recovery of PET packaging and film or fiber waste were particular areas of emphasis, as were lots of new granulators, from the world’s biggest to micro-size and even ‘clean-room’ models.
-
What to See at NPE 2006: Recycling and Scrap Reclaim
Recycling and reclamation are once again hot technologies—this time because of high resin prices.
-
K 2004 Wrap-Up on Recycling & Scrap Reclaim: Turn Trash to Cash with New Compactors, Shredders and Grinders
Topping recycling news at the latest giant K Show in Dusseldorf, Germany, were new compactor technologies for films and foams that can densify plastic waste for recycling and even mold finished parts—not just save space in a landfill.
-
Big German Plant May Relieve U.S. Bottleneck in Recycling Carpet Nylon
An unexpected bottleneck in U.S. nylon recycling could be alleviated by a giant new carpet recycling plant in Germany.
-
From NPE 2000: Recycling & Scrap Reclaim
Recycled Resin Prices Flatten OutNew systems to process mixed plastic waste and to upgrade it with fiberglass or wood flour were prominent at last June’s show in Chicago.
-
Garbage In, Good Plastics Out
Experts consider it the most high-tech recycling plant in the world: Schwarzataler Kunststoff in Germany takes dirty bottles and film from post-consumer recycling and turns them into automotive and other compounds in a fully automated process.
