Exploring the: Additives Zone



« Prev | | Next »

Sort by:


Milan Plast Was Good With Plans To Be Even Better
Big international turnout at the triennial international fair for the plastics and rubber industry, Milan Plast: check out the Plastics Technology slideshow.
Blog Published: 5/12/2015
'Clean, Sustainable' Carbon Black Production On Our Shores
Monolith's carbon black process, which uses natural gas as feedstock, will now be applied to a full-scale manufacturing facility in Nebraska.
Blog Published: 4/24/2015
Lehigh Technologies Gets 2015 Bloomberg New Energy Pioneer Award
Ten-year old Lehigh gets award for its engineered micronized rubber powders derived from old tires.
Blog Published: 4/20/2015
Novel Additives Enhance Processing, Performance Of Engineering Resins
Struktol is debuting additives based on novel chemistry that enhance performance of nylons 6, 6,6 and more.
Blog Published: 3/24/2015
Study Shows Many Additives Designed to Biodegrade PE, PET Don't Work
Michigan State U. 3-year study does not fare well for additives that claim to break down plastics.
Blog Published: 2/23/2015
Orlando Startup To Showcase 'Green', Affordable Graphene Additive
Garmor plans to display samples of plastic composites using its low-cost graphene oxide at NPE2015 Startup Garage.
Blog Published: 2/19/2015
BPA Gets European Authority's 'Green Light' Following FDA Ruling
Last December, FDA confirmed that BPA is safe as currently used and the EFSA has now ruled similarly.
Blog Published: 1/25/2015
PolyOne Releases Four Color Palettes For 2016
Aiming to inspire designers of plastic products, PolyOne launched InVisio Color Inspiration 2016.
Blog Published: 1/21/2015
Polymer Technology Innovations To Star At 'NPE2015 Startup Garage'
Expect to see at least twelve startup ventures with exciting new technologies at the 'NPE2015 Startup Garage' exhibitions.
Blog Published: 1/12/2015
Are Fillers and Pigments Impacting Your Processing Parameters?
As parts are loaded with higher and higher levels of fillers, pigments, and more, processors don’t always consider the impact these additives have on production.
Blog Published: 11/25/2014

« Prev | | Next »


Loading the player ...
PTOnline
All rights reserved. Copyright © Gardner Business Media, Inc. 2015 Cincinnati, Ohio 45244