Exploring the: NPE2012 Zone
|
Sort by: |
- Foaming Developments Aplenty in Extrusion
- At NPE2012, Macro Engineering and Technology, Mississauga, Ont., launched new technology to extrude foamed films in what it describes as an “environmentally friendly process” that uses inert gas as the foaming agent.
Article Published: 4/29/2012
- ‘RollTrusion’ Mates Rolled Metal & Extrusion
- Crosshead extrusion is the typical means of coating plastics on relatively small substrates such as wire.
Article Published: 4/29/2012
- Now You Can Refurbish Twin-Screw Elements
- Two suppliers of twin-screw compounding extruders announced at NPE2012 that they are now offering screw-element refurbishing services.
Article Published: 4/29/2012
- New Way to Characterize Moldability Of Resins & Part/Tool Designs
- Experienced injection molders have long known that a resin’s melt flow index (MFI), measured under very low-shear conditions, provides very little information about how it will process under many orders of magnitude higher shear in an actual m...
Article Published: 4/29/2012
- MATERIALS AT NPE: All Market Sectors Benefit from Large Crop of New Materials
- Higher-performance and easier processing PE film resins for packaging, a one-pass crosslinked PE for photovoltaic (PV) wire and cable, several higher-performing nylons and TPEs, “greener” plastics, and enhanced styrenic and PC resins are...
Article Published: 4/28/2012
- New PET Stretch-Blow Machines & Applications Debut at NPE
- Italian stretch-blow molding machinery builder Siapi (siapi.it) had a lot to talk about at NPE2012 last month in Orlando, Fla.
Article Published: 4/28/2012
- All-Electric Blow Molding Is Reaching the Tipping Point
- After years of talk, all-electric blow molding machines seem poised to make advances.
Article Published: 4/26/2012
- New Player, Familiar Name In Downstream Extrusion Equipment
- Bessemer Series debuts at NPE2012.
Article Published: 4/26/2012
- New Player, Familiar Name In Downstream Extrusion Equipment
- Baltimore-based Novatec Inc. rolled out the Bessemer Series of cooling tanks, pullers and cutters at NPE2012 last month in Orlando, Fla.
Article Published: 4/16/2012
- Take the Guesswork Out Of Profile-Cooling Needs
- Think your downstream spray-type extrusion cooling lines might be longer than you need?
Article Published: 3/28/2012
