Exploring the: NPE2012 Zone



« Prev | | Next »

Sort by:


MATERIALS AT NPE: All Market Sectors Benefit from Large Crop of New Materials
Higher-performance and easier processing PE film resins for packaging, a one-pass crosslinked PE for photovoltaic (PV) wire and cable, several higher-performing nylons and TPEs, “greener” plastics, and enhanced styrenic and PC resins are...
Article Published: 4/28/2012
New PET Stretch-Blow Machines & Applications Debut at NPE
Italian stretch-blow molding machinery builder Siapi (siapi.it) had a lot to talk about at NPE2012 last month in Orlando, Fla.
Article Published: 4/28/2012
All-Electric Blow Molding Is Reaching the Tipping Point
After years of talk, all-electric blow molding machines seem poised to make advances.
Article Published: 4/26/2012
New Player, Familiar Name In Downstream Extrusion Equipment
Bessemer Series debuts at NPE2012.
Article Published: 4/26/2012
New Player, Familiar Name In Downstream Extrusion Equipment
Baltimore-based Novatec Inc. rolled out the Bessemer Series of cooling tanks, pullers and cutters at NPE2012 last month in Orlando, Fla.
Article Published: 4/16/2012
Take the Guesswork Out Of Profile-Cooling Needs
Think your downstream spray-type extrusion cooling lines might be longer than you need?
Article Published: 3/28/2012
Mold-Masters Gains Exclusive Use Of Ritemp Technology for Hot Runners
Hot-runner supplier Mold-Masters Ltd., Georgetown, Ont., has obtained rights to exclusive global use of Ritemp evaporative cooling technology for hot-runner molds.
Article Published: 3/27/2012
Auxiliaries at NPE: New Solutions from Material Preparation To Post-Mold Operations
There will be an extraordinary range of new auxiliary equipment on display at the show.
Article Published: 2/25/2012
Tooling at NPE: A Hot-Runner Bonanza in Orlando
Most of the emphasis is on valve gating and on doing more in less space. Other highlights include standardized mold components, some impressive feats of moldmaking creativity, and advances in mold simulation.
Article Published: 2/24/2012
Thermoforming at NPE: Less Scrap, More Power For the Buck
Most of the developments will focus on in-line systems.
Article Published: 2/23/2012

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244