Exploring the: PET Processing - Extrusion Zone



« Prev | | Next »

Sort by:


Octal to Start PET Sheet Extrusion in Ohio
APET sheet to be made exclusively from sheet flake.
Article Published: 3/24/2014
Compounding PLA on Twin-Screws: What Testing Reveals
Twin-screw extrusion is the preferred method for compounding PLA and other biopolymers. But processing PLA is complicated because it’s sensitive to heat and shear. It’s also prone to hydrolytic degradation if moisture is present in molten PLA. Here’...
Article Published: 3/21/2014
Use Your Gauge to Solve Processing Issues Upstream
Gauging systems have an often-overlooked but equally important role beyond measuring web thickness: They can be used as a diagnostic tool to troubleshoot the process. Here's how.
Article Published: 2/25/2014
Extrusion/Compounding at K 2013: Having It All
Extrusion processors no longer need to chose among speed, quality, and flexibility, based on exhibits at K 2013.
Article Published: 12/18/2013
There’s No Lid on This Processor’s Creativity
For this lid maker, the keys to success are speed, flexibility and ingenuity.
Article Published: 11/26/2013
K 2013 Preview: Extrusion, Compounding, Recycling
Across all extrusion technologies, expect to see new standards in speed, quality, flexibility, and efficiency in both energy and material usage.
Article Published: 8/26/2013
Extrusion Without Discolored Specks
Specks are a common problem in extrusion, and avoiding them requires a two-pronged approach: First, figure out how many specks are in the incoming raw material; then minimize those caused during the extrusion process.
Article Published: 4/29/2013
New Option for No-Dry PET, PLA Sheet
New twin-screw system is based on a conical design.
Article Published: 3/28/2013
Sustainable Sheet: Placon Closes the Loop on PET Recycling
Placon reprocesses up to 12,000 lb/day of PCR PET to produce its EcoStar line of sheet.
Article Published: 2/26/2013
Extrusion & Compounding at NPE: Advances Push Efficiency Envelope
Blown film towers may have been scarce, but there was no shortage of new technology aimed at helping to make extrusion processors more profitable.
Article Published: 5/30/2012

« Prev | | Next »


Copyright © Gardner Business Media, Inc. 2014 All rights reserved.