Exploring the: PET Processing - Extrusion Zone



« Prev | | Next »

Sort by:


There’s No Lid on This Processor’s Creativity
For this lid maker, the keys to success are speed, flexibility and ingenuity.
Article Published: 11/26/2013
K 2013 Preview: Extrusion, Compounding, Recycling
Across all extrusion technologies, expect to see new standards in speed, quality, flexibility, and efficiency in both energy and material usage.
Article Published: 8/26/2013
Extrusion Without Discolored Specks
Specks are a common problem in extrusion, and avoiding them requires a two-pronged approach: First, figure out how many specks are in the incoming raw material; then minimize those caused during the extrusion process.
Article Published: 4/29/2013
New Option for No-Dry PET, PLA Sheet
New twin-screw system is based on a conical design.
Article Published: 3/28/2013
Sustainable Sheet: Placon Closes the Loop on PET Recycling
Placon reprocesses up to 12,000 lb/day of PCR PET to produce its EcoStar line of sheet.
Article Published: 2/26/2013
Extrusion & Compounding at NPE: Advances Push Efficiency Envelope
Blown film towers may have been scarce, but there was no shortage of new technology aimed at helping to make extrusion processors more profitable.
Article Published: 5/30/2012
Extruder Inspection & Vibration Analysis Detects Problems Early, Prevents Failures
Service is offered to all types of extrusion processors for all of types and makes of extruders and motors.
Article Published: 5/29/2012
Thrifty California Processor Dries PET with 'Waste' Heat
Southern California can be a challenging environment for manufacturers, not least because of concerns about the cost and availability of electrical power.
Article Published: 4/29/2012
Extrusion & Compounding at NPE: More Output, More Flexibility, Less Energy
There won't be many blown-film lines running, but there is still much in the way of innovation going on in extrusion and compounding.
Article Published: 2/23/2012
Now You Can Measure Pellet Moisture In the Hopper, in Real Time
Take the guesswork out of drying with new technology.
Article Published: 2/21/2012

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244