Exploring the: Barrier Blow Molding Zone



« Prev | | Next »

Sort by:


Blow Molding: New Machine Adopts Electro-Mechanical Actuators, Quick-Change Trimmer
Working in conjunction with customer Nampak, Velocity Equipment Solutions (New Castle, Penn.) is introducing two technology advances for the blow molding of HDPE containers.
New Product Announcements Published: 7/1/2014
MATERIALS: New Blow Molding Resins at SPE Conference
WEB EXCLUSIVE: Two new materials were presented at the recent SPE Annual Blow Molding Conference in Chicago.
New Product Announcements Published: 12/1/2011
Blow Molding: Change PET Bottle Molds in Under a Minute—November 2010
The Bottle Switch is a patented quick-change system from Sidel (U.S. office in Norcross, Ga.) that reduces PET mold-change times to less than a minute.
New Product Announcements Published: 1/4/2011
Blow Molding & Injection Molding Combined in One Process
WEB EXCLUSIVE: A novel process and a new material combined to produce one of the more unusual entries among the finalists for the SPE Automotive Innovation Awards last fall.
New Product Announcements Published: 2/1/2010
Blow Moldable Nylons for Small Fuel Tanks & Containers
Two new nylon 6 resins are in the final stages of commercialization for molding fuel containers (jerry cans) and small fuel tanks for motorcycles, snowmobiles, off-road vehicles, personal watercraft, boats, chain saws, and lawn/garden equipment.
New Product Announcements Published: 1/1/2010
New Milestones for Hot-Fill Bottles
WEB EXCLUSIVE: Smallest, lightest, hottest—the past year has seen three “firsts” for hot-fill PET containers.
New Product Announcements Published: 1/1/2010
All-Electric Reheat Machine for Big PET Bottles
W.
New Product Announcements Published: 12/1/2009
Barrier Masterbatches for PET Bottles
WEB EXCLUSIVE: Two new masterbatches from Clariant Additive Masterbatches, Winchester, Va., offer long-lasting barrier to oxygen and carbon dioxide in PET bottles.
New Product Announcements Published: 12/1/2009
PET Wall Measurements Control Bottle Blowing
The Process Pilot closed-loop blow molding control software from AGR International, Butler, Pa., is a real-time process management program that works in conjunction with the company’s PETWall Profi ler system to automatePET bottle production.
New Product Announcements Published: 11/1/2009
PET Bottle Output Rises, Energy Consumption Falls
WEB EXCLUSIVE: At last month’s Drinktec exhibition in Munich, Germany, Sidel of France introduced new technologies and services to produce more PET bottles faster with less energy consumption.
New Product Announcements Published: 10/1/2009

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244