Exploring the: Blow Molding Zone



« Prev | | Next »

Sort by:


Optimize Resin Management in Extrusion Blow Molding
In the EBM process, profits depend greatly on how judiciously you use resin.
Article Published: 12/28/2012
Injection Press Converts to Injection-Blow
A simple way for injection molders to get into blow molding of small containers for food, beverage, cosmetic, and pharmaceutical applications has been introduced through a collaboration of Engel Austria, the injection machine supplier (U.S. office i...
Article Published: 11/29/2012
News in Materials & Machinery at SPE Blow Molding Conference
New barrier materials for small fuel tanks, tooling developments for large, flat, and odd-shaped industrial parts, new all-electric machines for large containers, and gravimetric extrusion control for bottles are some of the topics discussed at the ...
Article Published: 11/28/2012
New Owners for American Kuhne
The Graham Group, York, Pa., last month announced it had bought controlling interest in American Kuhne (AK), the Ashaway, R.I.-based manufacturer of extruders, screws, and integrated extrusion systems.
Article Published: 11/3/2012
Understanding Gravimetric Blender Accuracy & Payback
Accuracy is one of the least understood aspects of blending. The differences between batch and continuous blenders, how blend accuracy is calculated and controlled, which blender type is more accurate, how much accuracy is really required, and how p...
Article Published: 10/26/2012
Novel Materials Stretch Process Capabilities
The potential for new or unusual materials to broaden the application potential of standard plastics processes was explored in a number of papers at April’s SPE ANTEC conference in Orlando, Fla.
Article Published: 9/28/2012
Drumroll, Please: How Mauser Rose to Number 1
Drum blow molder Mauser has used acquisitions, home-made machine building and careful attention to processing details to take the leading position in the field.
Article Published: 7/30/2012
Avoid Four Common Traps In Granulation
Today, more than ever, granulation is an important step in the total production process.
Article Published: 6/26/2012
TOOLING AT NPE: Hot Runners & Coinjection Grab Spotlight
Tooling innovations at NPE focused primarily on multi-cavity closure and medical applications, though there was also a substantial emphasis on large automotive and appliance parts.
Article Published: 6/25/2012
Compression Blow Forming Process Now in Commercial Production
Expectations of higher productivity, improved quality, and energy savings for a novel blow molding process are now being realized in commercial production at Amcor Rigid Plastics in Youngsville, N.C.
Article Published: 6/25/2012

« Prev | | Next »


Paratherm Corp.
PTOnline
All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244