Exploring the: Blow Molding Zone



« Prev | | Next »

Sort by:


BLOW MOLDING: Stretch-Blow PET Bottles Faster, While Using Less Energy
SIPA develops new generation of rotary reheat stretch-blow machines for PET bottles.
New Product Announcements Published: 10/24/2013
BLOW MOLDING: Another New All-Electric Machine To Debut at K 2013
Techne Graham Packaging Co. Italia Srl in Italy will show its latest all-electric extrusion blow molder at K 2013 in Dusseldorf.
New Product Announcements Published: 9/24/2013
BLOW MOLDING: New Name in PET Stretch-Blow Machines
Mould & Matic Solutions expands beyond injection, blow, and thermoforming molds and auxiliary automation.
New Product Announcements Published: 6/25/2013
EXTRUSION: Higher-Pressure Gas Injection For Microcellular Foams
Applicable to extrusion and blow molding operations.
New Product Announcements Published: 4/29/2013
MATERIALS: High-Temperature Nylon for Blow Molded Ducts
WEB EXCLUSIVE: DSM Engineering Plastics of the Netherlands (U.S. office in Evansville, Ind.) is offering what reportedly is the first high-temperature nylon for extrusion blow molded air ducts.
New Product Announcements Published: 3/1/2013
ADDITIVES: Liquid Colors for Trouble-Free Blow Molding
New liquid vehicle technology from Clariant Masterbatches, Holden, Mass., is designed to eliminate problems that have prevented wider use of liquid color in extrusion blow molding of polyolefins.
New Product Announcements Published: 12/28/2012
MATERIALS: New Amorphous PET for Easier Extrusion Blow Molding
WEB EXCLUSIVE: Aspira One, a new amorphous PET from Eastman Chemical Co., Kingsport, Tenn., reportedly provides an optimal balance of recyclability, product performance, processability, and aesthetics compared to existing PET resins used in extrusio...
New Product Announcements Published: 11/3/2012
BLOW MOLDING: All-In-One System Now Runs Faster
Sidel’s aseptic Combi Predis FMa technology—which combines PET bottle blowing, filling, and capping in a single system—is now available in a high-speed version that handles up to 48,000 bottles/hr for small containers of up to 700 ...
New Product Announcements Published: 7/31/2012
BLOW MOLDING: Injection-Blow Machine for Commodity Resins
New CR Series of injection-blow molding machines from Jomar Corp., Pleasantville, N.J., is designed for processing commodity resins like HDPE, LDPE, PP, and PS for producing dropper, roll-on, pharmaceutical, and healthcare bottles.
New Product Announcements Published: 6/25/2012
BLOW MOLDING: Italian Suction Blow Molder at NPE
This month, S.T.
New Product Announcements Published: 3/28/2012

« Prev | | Next »


Paratherm Corp.
PTOnline
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.