Exploring the: Drying Zone



« Prev | | Next »

Sort by:


New System Measures Moisture In Pellets During Processing
Self-calibrating system measures pellet moisture in real time and can adjust dryer controls accordingly.
Article Published: 12/23/2015
Why & When Should You Re-Crystallize PET Scrap?
Whether you’re blow molding PET bottles or extruding APET sheet, you’ll produce amorphous scrap in the process. How you handle it will impact your production costs. Re-crystallizing it will help.
Article Published: 10/26/2015
‘Wearable’ Machine Sensors Extended to Power Factor & Retrofits
As is often the case with a new technology, customers are dictating how predictive-maintenance sensors will be applied and where they might be headed next.
Article Published: 9/27/2015
How to Keep Moisture Away From Your APET Sheet Line
Moisture in PET will result in degradation that will foul up sheet and thermoformed products. Keep it at bay by following these tips when drying APET virgin and flake material.
Article Published: 7/16/2015
Auxiliaries AT NPE: New Controls Link Auxiliaries
Industry 4.0—the internet of things—is bringing a new level of connectivity to auxiliary equipment. Here’s a rundown of developments there, along with other news in auxiliaries from the show.
Article Published: 7/1/2015
Moretto Considers North American Assembly of Eureka Drying Technology
The Italian company's largest Eureka drying system is currently installed at an undisclosed North American customer.
Article Published: 3/24/2015
PPA Adds Four to Membership Roster
Group also names Gail Bristol new president.
Article Published: 3/10/2015
AUXILIARIES AT NPE: More Control, Flexibility, And Energy Efficiency
These are key trends in the many kinds of auxiliary equipment displayed at this month’s show. You’ll also see equipment designed to be virtually ‘foolproof.’
Article Published: 2/24/2015
Short-Run Specialist Chases Higher Productivity While Staying Lean
How do you automate jobs that run only a few hours? That’s only one of the questions challenging a fast-growing, short-run molder.
Article Published: 2/19/2015
Detect When Equipment Needs Maintenance—Before It’s Too Late
New technology to debut next month at NPE warns when preventive maintenance is needed, before equipment failure disrupts production.
Article Published: 1/30/2015

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2016 Cincinnati, Ohio 45244