Exploring the: All Electric & Hybrid Machines Zone



« Prev | | Next »

Sort by:


K 2016 Injection Molding: Rapid Pace of Development of New Machines & Controls
Servo drives dominate. Other trends include multitouch screens, adding materials data to process controls, and Industry 4.0 connectivity.
Article Published: 12/28/2016
Precision Molding Without a QC Department?
At Prism Plastics, quality is baked into every step of the process. The result: 1 billion parts per year with a defect rate less than 1 ppm.
Article Published: 12/27/2016
New Injection Machine Safety Standards in Michigan Could Have National Consequences
In a bid to have the state’s safety guidelines better reflect the national standard, the Michigan Occupational Safety and Health Administration (MIOSHA) has adopted new machine safety guidelines that have sparked more questions than answers for mold...
Article Published: 11/13/2016
Two-Stage Injection Meets Molder’s Need for High Precision
Fixed screw and plunger with no check ring hold tolerances of millionths of an inch.
Article Published: 9/28/2016
A Molder’s Plea: Let’s Standardize Controllers
P,R,N,D is a standard for any automatic-transmission vehicle, regardless of who makes it. It isn’t so simple when it comes to injection molding machines. From manufacturer to manufacturer you will see little to no continuity in controller layout, ic...
Article Published: 9/27/2016
Moldmaker Branches Out With New Services & Technologies
NyproMold offers new development tooling program and the latest in servo drives, enhanced cooling, and CT scanning.
Article Published: 9/27/2016
Outrunning the Competition with the First Plastic 2-Stroke Engine Valves
All it took was some original ideas, a lot of nerve, and a little high-tech injection molding.
Article Published: 9/27/2016
K 2016 Preview: Injection Molding
Adapting injection molding to the concept of Industry 4.0 is gaining momentum. At this show you’ll see that the interconnected, integrated “factory of the future” is almost here.
Article Published: 8/25/2016
Milacron Launches “eSTORE”
Online ordering of spare parts, supplies, and whole machines and systems.
Article Published: 8/24/2016
Athena Announces Organizational Changes
Harold Luttmann has taken over as acting CEO, in addition to his current role of Chief Operations Officer.
Article Published: 8/18/2016

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2016 Cincinnati, Ohio 45244