Exploring the: All Electric & Hybrid Machines Zone



« Prev | | Next »

Sort by:


Automotive molder seeks flexible solution for diverse drying needs
Clear, amber or red; headlights, taillights and turn signals: those are just some of the constantly changing jobs that custom automotive molder TASUS pulls in and out of its presses, requiring a flexible drying system to handle the ever-changing run...
Article Published: 1/10/2014
Processors Find Their Place at K 2013
Sprinkled among the 17 halls, often overshadowed by the billion-dollar machinery and material suppliers surrounding them, were no small number of processors.
Article Published: 12/30/2013
EVCO Plastics at 50: Still Thinking Big
In its first half-century, EVCO Plastics has grown from one half-ounce injection machine in a basement to a $130 million company with 148 presses and 900 employees at nine plants in the U.S., Mexico, and China.
Article Published: 12/30/2013
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 sho...
Article Published: 12/18/2013
‘ECO-ECONOMICS ’: Harbec Plastics Proves It Pays to Be ‘Green’
Bechtold has spent 15 years in an ongoing quest to prove that manufacturing in a sustainable manner is not opposed to profitability. On the contrary, he says his experience shows that sustainability is an economic opportunity that manufacturers can...
Article Published: 9/24/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013
New Hybrid Machine Platform Focused on Customization, Integration, Energy Savings
After five years of product development behind the scenes, Athena Automation is ready for its close-up.
Article Published: 6/25/2013
Extreme Molding’s Mantra: ‘Find Your Niche and Stick to It’
For a small custom injection molder competing in today’s global market, Lynn Momrow-Zielinski has two pieces of advice: 1) Develop a business plan and stick to it. 2) Find a technical and/or market niche and stick to that, too.
Article Published: 6/25/2013
BD’s Holistic Approach To Sustainability
For medical device giant Becton Dickinson, sustainability takes into account material selection, manufacturing, packaging, logistics, waste reduction, energy use and reduction, and more.
Article Published: 5/28/2013

« Prev | | Next »


Copyright © Gardner Business Media, Inc. 2014 All rights reserved.