Exploring the: All Electric & Hybrid Machines Zone



« Prev | | Next »

Sort by:


‘ECO-ECONOMICS ’: Harbec Plastics Proves It Pays to Be ‘Green’
Bechtold has spent 15 years in an ongoing quest to prove that manufacturing in a sustainable manner is not opposed to profitability. On the contrary, he says his experience shows that sustainability is an economic opportunity that manufacturers can...
Article Published: 9/24/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013
New Hybrid Machine Platform Focused on Customization, Integration, Energy Savings
After five years of product development behind the scenes, Athena Automation is ready for its close-up.
Article Published: 6/25/2013
Extreme Molding’s Mantra: ‘Find Your Niche and Stick to It’
For a small custom injection molder competing in today’s global market, Lynn Momrow-Zielinski has two pieces of advice: 1) Develop a business plan and stick to it. 2) Find a technical and/or market niche and stick to that, too.
Article Published: 6/25/2013
BD’s Holistic Approach To Sustainability
For medical device giant Becton Dickinson, sustainability takes into account material selection, manufacturing, packaging, logistics, waste reduction, energy use and reduction, and more.
Article Published: 5/28/2013
Sustainable Medical Molding: For Nypro, It’s Good Business
“Why worry about sustainability?” asks Ed Cathey, controller of Nypro’s Mebane, N.C., injection molding plant.
Article Published: 5/28/2013
Open House Highlights New Machines & Processes For Macro to Micro Parts
In late April, Wittmann Battenfeld GmbH hosted around 1100 visitors at its headquarters plant in Kottingbrunn, Austria, for a comprehensive demonstration of its latest injection molding technologies.
Article Published: 5/28/2013
Advantages of Servo-Driven Hydraulics For Large Injection Machines
As injection molders continue to work to find ways to optimize their processes, energy efficiency continues to be a primary area of concern.
Article Published: 4/29/2013
Sumitomo (SHI ) Demag Opens U.S. Technology Center in Ohio
Facility will be used for customer mold trials, machine demonstrations, technology testing, and hands-on training.
Article Published: 4/29/2013

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244