Exploring the: All Electric & Hybrid Machines Zone



« Prev | | Next »

Sort by:


Switch Over To Consistent Quality
A new process-control method picks up variations in melt quality and viscosity during the injection phase and equalizes them within the same shot.
Article Published: 2/25/2014
Hyundai targets North American market with Korean made injection molding machines
Korean car makers setting up shop in the United States are increasingly bringing their suppliers along. In a recent twist, however, now their suppliers’ suppliers are coming stateside as well, with the latest—Hyundai Injection Machinery—sharing its ...
Article Published: 2/24/2014
Milacron reestablishes West Coast presence with new tech center
Milacron has a new West Coast home in Irvine, Calif., formally opening its new High Impact Technical (HIT) Center, with more "HITs" planned for the future.
Article Published: 2/12/2014
Automotive molder seeks flexible solution for diverse drying needs
Clear, amber or red; headlights, taillights and turn signals: those are just some of the constantly changing jobs that custom automotive molder TASUS pulls in and out of its presses, requiring a flexible drying system to handle the ever-changing run...
Article Published: 1/10/2014
Processors Find Their Place at K 2013
Sprinkled among the 17 halls, often overshadowed by the billion-dollar machinery and material suppliers surrounding them, were no small number of processors.
Article Published: 12/30/2013
EVCO Plastics at 50: Still Thinking Big
In its first half-century, EVCO Plastics has grown from one half-ounce injection machine in a basement to a $130 million company with 148 presses and 900 employees at nine plants in the U.S., Mexico, and China.
Article Published: 12/30/2013
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 sho...
Article Published: 12/18/2013
‘ECO-ECONOMICS ’: Harbec Plastics Proves It Pays to Be ‘Green’
Bechtold has spent 15 years in an ongoing quest to prove that manufacturing in a sustainable manner is not opposed to profitability. On the contrary, he says his experience shows that sustainability is an economic opportunity that manufacturers can...
Article Published: 9/24/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013

« Prev | | Next »


Copyright © Gardner Business Media, Inc. 2014 All rights reserved.