Exploring the: All Electric & Hybrid Machines Zone



« Prev | | Next »

Sort by:


INJECTION MOLDING: Two New Closure Systems Shown at K 2016
72 mineral-water caps in 2.4 sec.
New Product Published: 9/22/2016
INJECTION MOLDING: ‘Entry-Level’ Electric Machines With Good Price/Performance Ratio
Economy through standardization marks this new electric series.
New Product Published: 4/14/2016
INJECTION MOLDING: Revamped Line Promises Greater Injection Speed, Lower Energy Use
Linear guides throughout and a purpose-built ball screw contribute to greater speed and efficiency for Toshiba’s new all-electric line.
New Product Published: 3/3/2016
INJECTION MOLDING: New Electric Press Series Geared for Mid-Sized Molding
Highly spec'ed presses handle bigger, heavier molds for mid-sized automotive and other parts.
New Product Published: 1/12/2016
INJECTION MOLDING: Enhanced Auxiliary Injection Units
New software, radial-mount options, and other upgrades.
New Product Published: 12/23/2015
INJECTION MOLDING: New Hybrid Micromolding Machine With Servohydraulic Clamp
Dial down the tonnage as low as 5%, or 1.5 tons.
New Product Published: 12/23/2015
INJECTION MOLDING: Energy-Saving Presses and Medical Systems Debut at Fakuma
Larger models complete servohydraulic series; presses get cleanroom qualification.
New Product Published: 10/23/2015
INJECTION MOLDING: Efficient Motors, Drives for Injection Presses at NPE
News in hydraulics, servos, and servo-hydraulics.
New Product Published: 9/28/2015
INJECTION MOLDING: Sneak Peek at Fakuma News
News in LSR, micromolding, IML, medical technology, and more.
New Product Published: 9/25/2015
INJECTION MOLDING: Engel Unveils Robots, Software at Austrian Open House
Six-axis giants for presses up to 5500 tons, and new in-cycle holding-pressure control.
New Product Published: 7/23/2015

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2016 Cincinnati, Ohio 45244