Exploring the: Feeding & Blending Zone



« Prev | | Next »

Sort by:


New Continuous Gravimetric Extrusion Control System
By accurately measuring material throughput, gravimetric extrusion control can compensate for material and process variations and provide more consistent end product quality.
Article Published: 2/12/2008
New Low Rate Feeder: Micro Cone Feeder
The K-Tron Micro Cone feeder features a highly innovative screw-less feeding mechanism to accurately dose free flowing color, masterbatch or additives into a blending system or directly into the process screw of an extruder.
Article Published: 2/12/2008
Removable Bins on Conair TrueBlend™ Blenders Increase Flexibility, Speed Material Changeovers
The TrueBlend 250 Series blenders, with throughputs as high as 1000 lbs/hr, can now be equipped with compact, removable material bins in two of the four hopper positions.
Article Published: 1/10/2008
High-Heat Options for Conair TrueBlend™ Blenders Allow Processing of Pre-Dried Materials
Processors running engineering plastics like ABS, nylon, polycarbonate and PET, can now blend these resins after they are dried, thanks to new high-temperature models available for TrueBlend 100, 250, 500 and 900 Series blenders, which offer through...
Article Published: 1/10/2008
Newest, Biggest TrueBlend™ Blenders from Conair Mix as Many as Six Materials at Rates to 14,000 lbs/hr
Since the recent introduction of the innovative Conair TrueBlend™ gravimetric blenders, hundreds of them have been sold.
Article Published: 1/10/2008
Coloring on the Machine: You Can Do It Right
Coloring at the machine can offer significant cost benefits, including lower material inventory costs and improved process flexibility when compared with the cost of buying precolored resin or installing a large-capacity central blender to premix re...
Article Published: 4/1/2007
NPE 2006 News Wrap-Up: Materials Handling: A Host of Refinements and Updates
NPE 2006 held no revolutionary changes in dryers, blenders, feeders, loaders, or conveying controls, but widely adopted improvements make the newest models easier to use and maintain—and easier on the budget, too.
Article Published: 10/1/2006
Brabender NEW ScrewDisc Feeder
Brabender Technologie NEW ScrewDisc Feeder For optimum performance in feeding pellets and free flowing granules, the Brabender ScrewDisc Loss-in-Weight feeder offers a Pulsationless flow over a wide feed rate range.
Article Published: 3/9/2006
FlexWall Plus - Easy Change Feeder
Brabender Technologie Inc. demonstrates the NEW “Easy Change” hopper design for the FlexWall Plus feeder.
Article Published: 3/9/2006
Fix Thickness Variations in Extruded Sheet
Non-uniform thickness in extruded sheet is a serious problem.
Article Published: 8/1/2005

« Prev | | Next »


Maguire Products
All rights reserved. Copyright © Gardner Business Media, Inc. 2015 Cincinnati, Ohio 45244