Exploring the: In-Mold Decorating Zone



« Prev | | Next »

Sort by:


WittmannBattenfeld Expands Mexican Operations
WittmannBattenfeld’s Mexican subsidiary is undergoing its second expansion in two years, boosting warehouse and office space at its Querétaro subsidiary.
Article Published: 12/9/2014
Packaging: Food Container Relies on IML for Oxygen Barrier
Barrier coextruded in-mold label protects pasta sauce in injection molded tub.
Article Published: 7/21/2014
Milacron reestablishes West Coast presence with new tech center
Milacron has a new West Coast home in Irvine, Calif., formally opening its new High Impact Technical (HIT) Center, with more "HITs" planned for the future.
Article Published: 2/12/2014
EVCO Plastics at 50: Still Thinking Big
In its first half-century, EVCO Plastics has grown from one half-ounce injection machine in a basement to a $130 million company with 148 presses and 900 employees at nine plants in the U.S., Mexico, and China.
Article Published: 12/30/2013
Molder Puts the ‘Art’ into Decorating
Custom molder took its expertise in in-mold coloring, IML, and IMD to the next level with the launch of a new division, Artistry of Plastics. The operation utilizes a proprietary technique, trade named Fabric Fusion, which merges resins with textile...
Article Published: 12/29/2013
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 sho...
Article Published: 12/18/2013
Headlines from the K 2013 Show
Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.
Article Published: 11/25/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013
Open House Highlights New Machines & Processes For Macro to Micro Parts
In late April, Wittmann Battenfeld GmbH hosted around 1100 visitors at its headquarters plant in Kottingbrunn, Austria, for a comprehensive demonstration of its latest injection molding technologies.
Article Published: 5/28/2013

« Prev | | Next »


PTOnline
All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244