Exploring the: In-Mold Decorating Zone



« Prev | | Next »

Sort by:


Food Container Relies on IML for Oxygen Barrier
Barrier coextruded in-mold label protects pasta sauce in injection molded tub.
Article Published: 7/21/2014
Milacron reestablishes West Coast presence with new tech center
Milacron has a new West Coast home in Irvine, Calif., formally opening its new High Impact Technical (HIT) Center, with more "HITs" planned for the future.
Article Published: 2/12/2014
EVCO Plastics at 50: Still Thinking Big
In its first half-century, EVCO Plastics has grown from one half-ounce injection machine in a basement to a $130 million company with 148 presses and 900 employees at nine plants in the U.S., Mexico, and China.
Article Published: 12/30/2013
Molder Puts the ‘Art’ into Decorating
Custom molder took its expertise in in-mold coloring, IML, and IMD to the next level with the launch of a new division, Artistry of Plastics. The operation utilizes a proprietary technique, trade named Fabric Fusion, which merges resins with textile...
Article Published: 12/29/2013
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 sho...
Article Published: 12/18/2013
Headlines from the K 2013 Show
Here’s just a taste of the innovations on display, a selection of the top headlines not covered in our September show preview.
Article Published: 11/25/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013
Open House Highlights New Machines & Processes For Macro to Micro Parts
In late April, Wittmann Battenfeld GmbH hosted around 1100 visitors at its headquarters plant in Kottingbrunn, Austria, for a comprehensive demonstration of its latest injection molding technologies.
Article Published: 5/28/2013
New Machines & Processes for Medical, Automotive, Packaging, Electronics
Engel’s technical symposium in June attracted 2700 visitors from 35 countries to two days of technical presentations and 18 injection molding exhibits at the company’s plant in St.
Article Published: 8/27/2012

« Prev | | Next »


PTOnline
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.