Exploring the: Medical Zone



« Prev | | Next »

Sort by:


More Growth & Equipment Investment For Processors This Year
Gardner’s research projects that processors will invest around $3.3 billion in primary machinery, auxiliary equipment, and molds and related supplies this year, about 10% more than its projection for 2013.
Article Published: 12/30/2013
Medical Device Nabs Thermoforming Award
A thermoformed medical device from Ray Products won first place in the Heavy-Gauge, Pressure-Formed category at the SPE Thermoforming Div. annual parts competition, held recently in Atlanta.
Article Published: 11/26/2013
Medical Molder Expands into Full-Service Product Development
In July, Mack Molding acquired Synectic Engineering, Inc., Milford, Conn., a company focused 100% on medical product development.
Article Published: 9/24/2013
New Approach to Micro Molding to Debut at K Show This Month
It has clamping and injection systems unlike any other machine on the market.
Article Published: 9/24/2013
Pull Yourself to More Accurate, Repeatable Medical Tubing
The puller is the heart of the tubing extrusion process. While material throughput rate is generated by the extruder, and the tubing is initially formed in the die, it’s the puller that develops the ID/OD and wall thickness.
Article Published: 9/23/2013
News in Medical Tubing & Materials
Two innovations in medical tubing and more than a dozen new materials, coatings, and adhesives were on display at June’s Medical Design & Manufacturing (MD&M) East show in Philadelphia.
Article Published: 8/28/2013
K 2013 Preview: Materials & Additives
The K 2013 show will present a broad range of engineered plastics materials, including thermoplastic composites, as well as additives. Automotive and electronic applications will be the main targets, as well as medical, packaging, lighting, and cons...
Article Published: 8/28/2013
K 2013 Preview: Injection Molding
Next month’s mammoth triennial plastics show in Düsseldorf, Germany, challenges injection molding machine builders to demonstrate technological leadership in addressing the needs of the marketplace.
Article Published: 8/26/2013
Higher Speeds, More Integrated Processes at K Show
“Go faster” and “integrate more functions” look to be the guiding principles of new injection molding developments to be shown by Engel Austria at K 2013 in Dusseldorf this October.
Article Published: 7/29/2013
‘Reshoring’ Is Not a Myth
For this molder, 35% to 40% of current sales is new business generated in the past two to three years—and some of that is due to reshoring.
Article Published: 7/29/2013

« Prev | | Next »


IQMS
Boy Machines Inc
Chem-Pak Inc
Copyright © Gardner Business Media, Inc. 2014 All rights reserved.