Exploring the: Micro Molding Zone
|
Sort by: |
- Injection Molding at NPE: Speed, Automation & Integration Take Center Stage
- Hot buttons at the show will be multi-component molding, in-mold labeling/decorating (IML/IMD), in-mold assembly, medical molding, liquid silicone rubber (LSR), micro-molding, and high-speed packaging.
Article Published: 2/23/2012
- Secrets of Success in Micro Molding
- Medical-device, electronics, and biopharmaceutical manufacturers need new micro-molded products to create tinier, less invasive, and/or space-saving micro devices.
Article Published: 2/21/2012
- Molding 2012 Conference Hits the Hot Topics
- Medical molding, liquid silicone rubber (LSR) molding, micromolding (even of LSR), energy management, biopolymers, and sustainable, “green” molding—these and more topics of highest interest to injection molders today will be presen...
Article Published: 10/25/2011
- Vision Inspection Integrated with Press Control
- Machine-operator access to 100% quality inspection of micro-part dimensions is available with the new PowerVision option from Wittmann Battenfeld, Torrington, Conn.
Article Published: 8/23/2011
- Novel Molds & Machinery for Medical Molding
- The combined MD&M East and Plastec East shows in N.Y.C. in June presented intriguing developments for medical injection molders.
Article Published: 7/27/2011
- Micro Molder & Mold Maker Succeeds by Specializing
- How small is small? How small is micro? How about parts weighing as little as 0.00012 g and measuring no more than 0.038 in. (1 mm) long?
Article Published: 4/24/2011
- K 2010 Preview, Injection Molding New All-Electrics & Hybrids Balance Performance & Economy
- The world’s largest plastics show, coming up next month in Dusseldorf, Germany, provides ample evidence of the growing sway of electric drive technology in injection molding.
Article Published: 12/21/2010
- New Presses, Robots & Process Technologies To Debut at K 2010 Fair
- The exhibit of Engel Austria at October’s K 2010 fair in Dusseldorf, Germany, will host a wide range of product introductions, ranging from new machines for caps/closures and micromolding to a new model of small electric press, a new generatio...
Article Published: 7/1/2010
- Injection Molding at NPE 2003
- Show goers will see an electric injection machine in nearly every press maker’s booth this year, and electric/hydraulic hybrids in several.
Article Published: 6/7/2010
- New Machines & Processes Unveiled By Wittmann Battenfeld
- At an open house in Kottingbrunn, Austria, last month, Wittmann Battenfeld GmbH showed what it has been doing to make good on its pledge to reinvigorate the venerable Battenfeld name and its reputation for innovation.
Article Published: 6/1/2010
