Exploring the: Mold Simulation Zone



« Prev | | Next »

Sort by:


Tier 1 Automotive Molder Uses Team Approach to Mold Simulation
SRG Global calls in outside assistance to solve a tricky technical problem.
Article Published: 5/29/2012
New Way to Characterize Moldability Of Resins & Part/Tool Designs
Experienced injection molders have long known that a resin’s melt flow index (MFI), measured under very low-shear conditions, provides very little information about how it will process under many orders of magnitude higher shear in an actual m...
Article Published: 4/29/2012
Tooling at NPE: A Hot-Runner Bonanza in Orlando
Most of the emphasis is on valve gating and on doing more in less space. Other highlights include standardized mold components, some impressive feats of moldmaking creativity, and advances in mold simulation.
Article Published: 2/24/2012
Benchmarking Simulation Software: How One Molder Did It
Injection mold simulation has become a standard tool for molders and mold designers.
Article Published: 10/25/2011
Do Flow Simulation 'in the Cloud'
Autodesk Inc., San Rafael, Calif., has just made available a new version of its Moldflow Insight software that takes time-consuming meshing and analysis functions off your desktop and performs them at a remote data center accessed via the Internet.
Article Published: 10/25/2011
WEB EXCLUSIVE: Do Flow Simulation ‘in the Cloud’
Autodesk Inc., San Rafael, Calif., has just made available a new version of its Moldflow Insight software that takes time-consuming meshing and analysis functions off your desktop and performs them at a remote data center accessed via the Internet.
Article Published: 9/26/2011
Optimize Plug Shape for Thermoforming
Software will adjust the shape to provide more uniform material thickness in the formed part
Article Published: 6/27/2011
Mold Filling Simulation: What, When, Why, How
Mold-filling analysis is the right direction to go, but if you want to arrive at your destination—good parts and an efficient process—you’ll need to pay attention to all the details and select an experienced professional to do the analysis.
Article Published: 6/27/2011
What’s New in Mold Simulation
Seamless integration with CAD and FEA structural analysis is a common theme among the major software products.
Article Published: 6/27/2011
Tips and Techniques: Mold Filling Analysis Now You Can Adapt Injection Mold Filling Simulation for MuCell
While mold-filling simulation is a very common tool for predicting the fill patterns of an injection mold, in our judgment there is not yet a commercially available, satisfactory filling simulation for microcellular foam molding.
Article Published: 12/23/2010

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2015 Cincinnati, Ohio 45244