Exploring the: Mold Simulation Zone
|
Sort by: |
- Moldflow Quitting Hot Runners and Shop-Floor Products
- Moldflow Corp., Framingham, Mass., has decided to focus on its CAE Design Analysis Solutions business and sell off its Manufacturing Solutions Div.
Article Published: 6/27/2007
- Global Competition - High Shipping Costs Give U.S. Blow Molders an Edge
- When it comes to foreign competition, blow molders feel relatively invulnerable in their biggest market–bottles.
Article Published: 1/1/2007
- Vero Buys TMconcept Flow Analysis Software
- Vero International Software Inc., Wixom, Mich., supplier of the VISI-Series CAD/CAM/CAE software package, has acquired Plastics & Computer Inc. of Milan, Italy (U.S. office in Dallas). Headed by Giorgio Bertacchi, Plastics & Computer was a 25-year-o...
Article Published: 12/29/2006
- Long-Glass Thermoplastics and Blow Molding Grab SPE Automotive Awards
- Long-glass reinforcements and structural blow molding accounted for four of this year’s nine SPE Automotive Innovation Awards, presented last month in Detroit.
Article Published: 12/1/2006
- Injection Molding Research Targets Micro-Molding, Sinks and Foams
- The IKV in Aachen, Germany, is known internationally as one of the foremost academic incubators of new plastics technology.
Article Published: 10/1/2006
- What to See at NPE 2006: CAD/CAM and CAE
- The newest generation of 3D simulation software takes aim at screw designs as well as hot-runner, mold, and part design.
Article Published: 6/1/2006
- NPE 2006 News Flash
- Injection MoldingSimplified Hot Runners Save Time & CostA new lower-cost hot-runner alternative to valve gating is suited to less critical cosmetic applications where users need predictable and reliable gate opening but not sequential gate opera...
Article Published: 5/1/2006
- Mold Analysis Gets Faster, Easier, Smarter
- On Dec. 28, Moldflow Corp. began shipping a major new release of its flagship injection mold simulation software, Moldflow Plastics Insight 6.0.
Article Published: 2/1/2006
- Family-Run Molder and Mold Maker Prospers for More Than 50 Years
- How does a small, family-owned custom molder remain competitive for 53 years without multiple plants, offshore clients, a specialized market niche, or unique leading-edge technology?
Article Published: 1/1/2006
- 50 Ideas That Changed Plastics
- Very few readers of this issue can remember, or even imagine, what it was like when an injection molding machine did not have a screw, but only a smooth-bore plunger.
Article Published: 10/1/2005
